توضیحات
ABSTRACT
Though p-xylene derived from naphtha reformate is in high demand as a raw material in the production of polyesters and polyethylene terephthalates, its separation from the FCC reformate is not easy due to close boiling points among the components in the reformate. When a proper solvent for the p-xylene separation is available, an extractive distillation can be applied in the separation. Currently the separation utilizes an adsorption process requiring a large amount of costly adsorbent and a desorption process followed by distillation. In the proposed extractive distillation here, p-dinitrobenzene has been utilized to improve the separation of p-xylene from its ethylbenzene mixture. The VLE data of the ternary mixture estimated with the UNIFAC were compared to those computed from molecular simulation to show their reliability. An extractive distillation and solvent recovery were applied to obtain 99.6% purity p-xylene with 99.1% recovery. The economics of the proposed process demonstrates its comparability to the existing Parex process.
INTRODUCTION
Xylene isomers and ethylbenzene are coexisting components in naphtha reformate, and they are separated by distillation as a group. Before the separation, the C8 compounds are in the aromatic compounds mixture, including benzene and toluene, contained in the extracts of extractive distillation using sulfolane . Further distillation splits the C8 components of close boiling points from others. Among the mixture p-xylene has high demand to produce terephthalic acid, a raw material in the production of polyesters and polyethylene terephthalates (PETs). The separation processes of p-xylene based on solvent extraction or crystallization were not efficient with only 60–65% recovery rate. The extractive distillation of ethylbenzene and p-xylene has been studied for many years , but no commercial process was developed due to no effective extractant found. Recently searching effective extractants extended to ionic liquid solvents in many extractive distillation processes. In 1971, the Universal Oil Products (UOP) commercialized a new separation method of p-xylene, an adsorption process, called the Parex process with a 95% recovery rate . Though the adsorption process is largely effective and efficient in the separation of a specific component from a mixture with high recovery and high purity, it requires a large volume of high-cost adsorbents.
چکیده
اگر چه p-xylene مشتق شده از نفتا ترانسفورماتور تقاضای بالا به عنوان مواد اولیه در تولید پلی استر و پلی اتیلن ترفتالات است، جداسازی آن از FCC اصلاح شده به دلیل نقطه جوش نزدیک در میان اجزای اصلاح کننده آسان نیست. هنگامی که یک حلال مناسب برای جداسازی p-xylene در دسترس است، یک تقطیر استخراج می تواند در جداسازی استفاده شود. در حال حاضر جداسازی از یک فرایند جذب استفاده می کند که نیازمند مقدار زیادی از جاذب های پر هزینه و یک فرایند جذب و پس از تقطیر است. در تقطیر پیشنهاد شده استخراج شده در اینجا، p-dinitrobenzene برای بهبود جداسازی p-xylene از مخلوط اتيل بنزن استفاده شده است. داده های VLE مخلوط سه بعدي، که با UNIFAC تخمين زده شده، با آن ها محاسبه شده از شبیه سازی مولکولی برای نشان دادن قابلیت اطمینان آنها مقایسه شد. تقطیر استخراج شده و بازیابی حلال برای به دست آوردن خلوص 99.6٪ پتاسیلنو با استفاده از بازیابی 99.1٪ اعمال شد. اقتصاد فرایند پیشنهادی نشان می دهد که قابلیت مقایسه آن با فرآیند Parex موجود است.
مقدمه
ايزومرهای کايلن و اتیل بنزن اجزای همساز موجود در فرآورده های نفتا هستند و از طریق تقطیر به عنوان یک گروه جدا می شوند. قبل از جداسازی، ترکیبات C8 در مخلوط ترکیبات آروماتیک، از جمله بنزن و تولوئن، حاوی عصاره های تقطیر استخراج شده با استفاده از سولفان هستند. تقطیر بیشتر تقسیم اجزای C8 نقطه جوش نزدیک از دیگران است. در میان مخلوط p-xylene تقاضای بالا برای تولید اسید ترفتالاتیک، مواد خام در تولید پلی استر و پلی اتیلن ترفتالات (PETs) است. فرایندهای جداسازی p-xylene براساس استخراج حلال یا کریستالیزاسیون تنها با سرعت بازیافتی 60-65٪ کارایی ندارند. تقطیر عصاره اتیل بنزن و پتاسیلن برای سال ها مورد بررسی قرار گرفته است، اما هیچ فرآیند تجاری به علت عدم بهره برداری مؤثر آن، توسعه یافت. اخیرا عصاره های مؤثر برای حلال های مایع یونیک در فرایندهای تقطیر استخراج شده اند. در سال 1971، محصولات جهانی نفت (UOP)، یک روش جداسازی جدید از p-xylene، فرآیند جذب، به نام فرآیند Parex با نرخ بازیابی 95٪ تجدید کرد. اگر چه فرایند جذب تا حد زیادی موثر و کارآمد در جداسازی یک مولفه خاص از مخلوط با بهبود بالا و خلوص بالا، نیاز به حجم زیادی از جاذب های پر هزینه است.
Year: 2019
Publisher : ELSEVIER
By : Chang Ho Seo, Young Han Kim
File Information: English Language/ 5 Page / size: 366 KB
سال : 1398
ناشر : ELSEVIER
کاری از : چانگ هو سئو، جوان هان کیم
اطلاعات فایل : زبان انگلیسی / 5 صفحه / حجم : KB 366
نقد و بررسیها
هنوز بررسیای ثبت نشده است.