توضیحات
ABSTRACT
In the present study, replacement of normal concrete aggregates with calcareous and silica aggregates and concrete endurance against acidic corrosion has been investigated. For this purpose, a number of concrete samples were built and placed in sulfate sodium and magnesium solutions. Then, in various time intervals, changes of weight, dimension and strength of samples have been assessed and the obtained results on the samples and solutions were considered as basis of judgment. Regarding the results of performed tests, it is observed that the samples built with calcareous aggregates have higher endurance and strength in acidic and corrosive environments. Regarding the statistical analyses, the calcareous samples showed more than 53% endurance improvement in acidic and corrosiveenvironments. So, using calcareous aggregates is an applied suggestion for raising the concreteendurance.
INTRODUCTION
One of the most fundamental and common materials used in construction of civil structures is concrete. In some projects, the subject of concrete endurance against acidic and corrosive environments has created some limitations in using this constructional product. In recent decades, costs due to destructions created by concrete corrosion have urged researchers to study and investigate approaches of increasing concrete endurance against corrosion and reduction ofcosts due to it. Considering the performed studies, the cost of concrete corrosion in various countries on averageincludes 1-5% of national gross revenue. Crack accession in the concrete occurs during a process where acid sulfuric and hydroxide calcium reaction at first leads to plaster production and in the following, the produced plaster reacts with hydrate aluminum and forms Ettringite. Plaster and Ettringite have a volume increase of about 7 and 2.2 against their constituting materials and this volume increase creates internal pressures and finally cracking and dissolution of the corroded concrete. Also, the materials produced due to corrosion have less strength comparing their constituting materials and so by progress of corrosion the concrete strength is decreased. On the other hand, sulfate invasion in the mortar or the concrete due to formation of products like Ettringite and plaster has long been known as a destructive phenomenon.
چکیده
در مطالعه حاضر، جایگزینی دانه های معمول بتن با سنگ آهک و سیلیکا و استحکام بتن در برابر خوردگی اسیدی مورد بررسی قرار گرفته است. برای این منظور تعداد نمونه های بتن ساخته شده و در محلول های سولفات سدیم و منیزیم قرار داده شده است. سپس، در فواصل زمانی مختلف، تغییر وزن، ابعاد و مقاومت نمونه ها مورد بررسی قرار گرفت و نتایج به دست آمده بر روی نمونه ها و محلول ها به عنوان پایه قضاوت در نظر گرفته شدند. با توجه به نتایج آزمایشات انجام شده، مشاهده می شود که نمونه هایی که با ترکیبات آهکی ساخته شده اند، دارای استقامت و مقاومت بیشتری در محیط های اسیدی و خوردگی هستند. با توجه به تجزیه و تحلیل آماری، نمونه های آهکی بیش از 53٪ بهبود استقامت در محیط های اسیدی و خوردگی را نشان داد. بنابراین، استفاده از سنگ آهک، یک پیشنهاد کاربردی برای بالا بردن استحکام بتن است.
مقدمه
یکی از اساسی ترین و رایج ترین مواد استفاده شده در ساخت سازه های مدنی بتن است. در برخی از پروژه ها، موضوع استقامت بتن در برابر محیط های اسیدی و خوردگی، محدودیت هایی در استفاده از این محصول ساختاری ایجاد کرده است. در دهه های اخیر، هزینه های ناشی از تخریب ایجاد شده توسط خوردگی بتن، پژوهشگران را به مطالعه و بررسی روش های افزایش استحکام بتن در برابر خوردگی و کاهش هزینه های ناشی از آن دعوت کرده است. با توجه به مطالعات انجام شده، هزینه خوردگی بتن در کشورهای مختلف به طور متوسط شامل 1 تا 5 درصد از درآمد ناخالص ملی است. گچ شدن در بتن در طول فرایند رخ می دهد که واکنش کلسیم اسید سولفوریک و هیدروکسید کلسیم در ابتدا منجر به تولید گچ می شود و در زیر، گچ تولید شده با هیدرات آلومینیوم واکنش داده و اترینگیت را تشکیل می دهد. گچ و اترینگیت در برابر مواد تشکیل دهنده آنها حدود 7 و 2/2 افزایش می یابد و این افزایش حجم باعث ایجاد فشار داخلی و در نهایت ترک خوردگی و انحلال بتن خورنده می شود. همچنین مواد تولید شده به علت خوردگی، مقاومت کمتری نسبت به مواد تشکیل دهنده آنها دارند و بنابراین با پیشرفت خوردگی، مقاومت بتن کاهش می یابد. از سوی دیگر، حمله سولفات به ملات یا بتن به علت تشکیل محصولات مانند اترینگیت و گچ به مدت طولانی به عنوان یک پدیده مخرب شناخته شده است.
Year: 2018
Publisher : Berlin International Congress of Science and Engineering
By : Meysam Manzari Tavakoli – Masoud Lakzadeh – Mohammademad Sabetipour kermani
File Information: English Language/ 7 Page / size: 384 KB
سال :1397
ناشر : کنگره بین المللی علوم و مهندسی برلین
کاری از : میثم منزری توکلی – مسعود لک زاده – محمدتقی سابتیپور کرمانی
اطلاعات فایل : زبان انگلیسی / 7 صفحه / حجم : KB 384
نقد و بررسیها
هنوز بررسیای ثبت نشده است.