توضیحات
ABSTRACT
in this paper we described a blind optimization technique with an in-expensive electronics for optical systems tomaximize the output signal. Deformable mirror is the main optical element used in the system to correct the wavefront andincrease the output signal. The mirror is controlled by genetic algorithms through the computer microphone port and two PCIExpress cards.
INTRODUCTION
Optical systems are widely used in telecommunication, imaging and sensing. In particular, optical imaging is of greatinterest, where an optical system is used to image the microstructures of tissue. One of the main problems facing such imaging systems is aberration which is due to the imperfection of optical elements and also the distortion produced in the junctions between the elements. The aberration is wavefront deformation which consequently reduces the optical and electrical signal to noise ratio and diminishes the contrast and resolution of the image. Owing to this, there is a great interest in wavefront correction in the imaging systems, for which the aberration reduction techniques are used . Deformable mirror (DM) is adaptive optics component used to correct the wavefront in the optical systems. The mirror is an electromagnetic deformable mirror with 52 actuators which are controlled individually by optimization algorithms. The mirror produces an appropriate wavefront for the system such that a higher output signal is achieved. The mirror is employed in open-loop or closed-loop control. In open-loop control, deformable mirror’s influence matrix and a wide range of predeformed shapes are used. However they are limited to a particular system and type of the aberration. Closed-loop control however can be used for the correction of dynamic aberrations which are different from system to system.
چکیده
در این مقاله، یک تکنیک بهینه سازی نوری با یک الکترونیک گرانقیمت برای سیستم های نوری را برای تگ زدن سیگنال خروجی توصیف کردیم. آینه ناپایدار عنصر اصلی نوری مورد استفاده در سیستم برای اصلاح موج موج و افزایش سیگنال خروجی است. آینه توسط الگوریتم های ژنتیکی از طریق پورت میکروفون کامپیوتر و دو کارت PCIExpress کنترل می شود.
مقدمه
سیستم های نوری به طور گسترده ای در مخابرات، تصویربرداری و سنجش استفاده می شود. به طور خاص، تصویربرداری نوری از جالب توجه است، که در آن یک سیستم نوری برای تصویرسازی میکروساختارهای بافت استفاده می شود. یکی از مشکالت عمده در چنین سیستم های تصویربرداری، آلودگی است که به دلیل ناقص عناصر نوری و همچنین اعوجاج تولید شده در اتصالات بین عناصر است. انحراف موجب تغییر شکل موج موج می شود که در نتیجه نسبت نوری و الکتریکی نسبت به نویز را کاهش می دهد و کنتراست و رزولوشن تصویر را کاهش می دهد. به همين دليل علاقه زيادي به اصلاح wavefront در سيستم هاي تصويربرداري وجود دارد که براي آن روش هاي کاهش آبراهي استفاده مي شود. آینه قابل انعطاف (DM) یک جزء اپتیکی تطبیقی است که برای اصلاح موج موج در سیستم های نوری مورد استفاده قرار می گیرد. آینه یک آینه الکترومغناطیسی قابل اصلاح با 52 عملگر است که به صورت جداگانه توسط الگوریتم های بهینه سازی کنترل می شوند. آینه یک موج موج مناسب برای سیستم تولید می کند به طوری که یک سیگنال خروجی بالاتر به دست می آید. آینه در کنترل حلقه باز یا کنترل حلقه بسته استفاده می شود. در کنترل حلقه باز، ماتریس نفوذ آینه معیوب و طیف گسترده ای از اشکال پیش ساخته شده مورد استفاده قرار می گیرد. با این حال آنها به یک سیستم خاص و نوع ابری محدود می شوند. با این حال، کنترل حلقه بسته می تواند برای اصلاح ابعاد پویای که از سیستم به سیستم متفاوت است استفاده شود.
Year: 2010
Publisher : Eighteenth International Energy Conference of Iran
By : Mohammad R. N. Avanaki, S. A. Hojjatoleslami , R. Ebrahimpour , H. Sarmadi , A. GH. Podoleanu
File Information: English Language/ 5 Page / size: 1.17 MB
سال :1389
ناشر : هجدهمین کنفرانس بین المللی برق ایران
کاری از : محمد رضا ن. آوناکی، سعید علی اکبر حجت الاسلامی، رحیم ابراهیم پور، حسین سرمادی، علی قندهار. Podoleanu
اطلاعات فایل : زبان انگلیسی / 5صفحه / حجم : MB 1.17
نقد و بررسیها
هنوز بررسیای ثبت نشده است.