توضیحات
ABSTRACT
A corrosion inhibitor is a chemical substance which, when added in small concentrations to an environment, minimizes or prevents corrosion.
Corrosion inhibitors are used to protect metals from corrosion, including temporary protection during storage or transport as well as localized protection, required, for example, to prevent corrosion that may result from accumulation of small amounts of an aggressive phase. One example is brine, in a nonaggressive phase, such as oil. An efficient inhibitor is compatible with the environment, is economical for application, and produces the desired effect when present in small concentrations. Inhibitor efficiency, P, is given asp = (w0 -w/w0) x 100 where W0 is the corrosion rate in the absence of inhibitor, and w is the corrosion rate in the same environment with the inhibitor added.
INTRODUCTION
Interface inhibitors control corrosion by forming a film at the metal/environment interface. Interface inhibitors can be classified into liquid- and vapor-phase inhibitors. 2.1. Liquid-Phase Inhibitors Liquid-phase inhibitors are classified as anodic, cathodic, or mixed inhibitors, depending on whether they inhibit the anodic, cathodic, or both electrochemical reactions. 2.LL Anodic inhibitors. Anodic inhibitors are usually used in near-neutral solutions where sparingly soluble corrosion products, such as oxides, hydroxides, or salts, are formed. They form, or facilitate the formation of, passivating films that inhibit the anodic metal dissolution reaction. Anodic inhibitors are often called passivating inhibitors. When the concentration of an anodic inhibitor is not sufficient, corrosion may be accelerated, rather then inhibited. The critical concentration above which inhibitors are effective depends on the nature and concentration of the aggressive ions. 2.7.2. Cathodic inhibitors. Cathodic inhibitors control corrosion by either decreasing the reduction rate (cathodic poisons) or by precipitating selectively on the cathodic areas (cathodic precipitators). Cathodic poisons, such as sulfides and selenides, are adsorbed on the metal surface; whereas compounds of arsenic, bismuth, and antimony are reduced at the cathode and form a metallic layer. In near-neutral and alkaline solutions, inorganic anions, such as phosphates, silicates, and borates, form protective films that decrease the cathodic reaction rate by limiting the diffusion of oxygen to the metal surface.
چکیده
بازدارنده خوردگی یک ماده شیمیایی است که وقتی در غلظت های کوچک به محیط اضافه می شود، خوردگی را به حداقل می رساند یا از آن محافظت می کند. مهار کننده های خوردگی برای حفاظت از فلزات از خوردگی، از جمله حفاظت موقت در حین ذخیره یا حمل و همچنین حفاظت موضعی استفاده می شود، مورد نیاز است، برای جلوگیری از خوردگی که ممکن است از انباشت مقادیر کم یک مرحله تهاجمی حاصل شود. یک مثال، آب نمک است، در فاز غیر تهاجمی، مانند روغن. مهار کننده موثر سازگار با محیط زیست است، برای کاربرد کاربردی اقتصادی است و در هنگام حضور در غلظت های کوچک، اثر مورد نظر را تولید می کند. بازده بازدارنده P، به عنوان asp = (w0 -w / w0) x 100 داده می شود که W0 نرخ خوردگی در غیاب مهار کننده است و w نرخ خوردگی در یک محیط مشابه با مهار کننده اضافه شده است.
مقدمه
مهار کننده های رابط کنترل خوردگی را با تشکیل یک فیلم در رابط فلزی / محیط زیست. مهار کننده های اینترفیس را می توان به مهار کننده های مایع و بخار طبقه بندی کرد. 2.1 مهار کننده های فاز مایع مهار کننده های مایع فاز به عنوان آنزیم های کاتالیزور، کاتدیک یا مخلوط مهار کننده طبقه بندی می شوند، بسته به این که آیا آنودایز، کاتدیک یا هر دو واکنش الکتروشیمیایی را مهار می کنند. 2.LL مهارکننده های آنودیک مهار کننده های آنودایز معمولا در محلول های نزدیک به بیضه استفاده می شوند که در آن محصولات خورنده ای مانند محلول، اکسید، هیدروکسید و یا نمک تشکیل می شود. آنها تشکیل و یا تسهیل تشکیل، passivating فیلم هایی که مانع از واکنش انحلال فلزی آنودایز. مهار کننده های آنودایتی اغلب مهار کننده های passivating نامیده می شوند. هنگامی که غلظت بازدارنده آنودایز کافی نیست، خوردگی ممکن است تسریع شود، و نه پس از آن مهار شود. غلظت بحرانی که بازدارنده ها بالاتر از آن تاثیر می گذارد بستگی به ماهیت و غلظت یون های تهاجمی دارد. 2.7.2 مهار کننده های کاتدی مهار کننده های کاتدی کنترل خوردگی را با کاهش میزان کاهش (سموم کاتدی) یا به صورت انتخابی بر روی مناطق کاتدی (رسوبات کاتدی)، کنترل می کنند. سموم کاتدیک مانند سولفید ها و سلنید ها بر روی سطح فلز جذب می شوند. در حالی که ترکیبات آرسنیک، بیسموت و آنتیموان در کاتد کاهش می یابد و یک لایه فلزی ایجاد می کند. در محلول های نزدیک به خنثی و قلیایی، آنیون های معدنی مانند فسفات، سیلیکات ها و بورات ها، فیلم های محافظتی را ایجاد می کنند که سرعت واکنش کاتدی را کاهش می دهند با محدود کردن انتشار اکسیژن به سطح فلز.
Year: 2000
Publisher : ISBN
By : S. PAPAVINASAM
File Information: English Language/ 17 Page / size: 767 KB
Only site members can download free of charge after registering and adding to the cart
سال : 1379
ناشر : ISBN
کاری از : S. PAPAVINASAM
اطلاعات فایل : زبان انگلیسی / 17 صفحه / حجم : KB 767
نقد و بررسیها
هنوز بررسیای ثبت نشده است.