توضیحات
چکیده
در اين مقاله به بررسي كمانش حاصل از جوشكاري لب به لب در ورقهاي نازك آلومينيومي7075با استفاده از مدلسازي سه بعدي المان محدود پرداخته شده است . آلياژهاي آلومينيوم بدليل خصوصيات ويژه حرارتي كه دارند در آنها تغييرفرمهاي شديدي بوجود مي آيد. اضافه شدن ماده جوش از الكترود در حين جوشكاري به قطعه پايه با استفاده از روش مرگ و تولد المانها و زمان مند كردن مدلسازي در نظر گرفته شده است. براي مدلسازي مكانيكي از مدل ويسكوپلاستيك آناند استفاده شده است . براي تشخيص كمانش محلي در هر نقطه در حين جوشكاري ، از مقايسه نمودارهاي تغييرفرم و تنش بر حسب زمان جوشكاري استفاده شده است. زماني كمانش محلي در يك نقطه تشخيص داده ميشود كه در نمودار تغييرفرم زمان آن نقطه پرشي ديده شود بدون اينكه تغييرمحسوسي در نمودار تنش- زمان آن نقطه در همان زمان پديد آيد. نتايج مدلسازي حرارتي و كمانش قطعه با داده هاي آزمايش هاي عملي مقايسه گرديده است.
مقدمه
از عمده ترين مشكلات بوجود آمده بر اثر جوشكاري در قطعات فلزي ، تغييرفرم هاي ناخواسته اي است كه باعث از دست رفتن فرم كلي قطعات مي شود. اين تغيير فرم ها بوسيله تنش هاي حرارتي پيچيده حاصل از جوشكاري در قطعات بوجود مي آيند. در بين تغيير فرمهاي به وجود آمده در طعات جوشكاري شده، كمانش تغيير فرمي است كه به طور ناگهاني و بدون هيچ گونه مشاهده قبلي ظاهر ميشود و از نظر مقدار نيز تغيير فرم زيادي را منجر ميشود. با پيشرفت رايانه ها و به وجود آمدن نرم افزارهاي تخصصي قابل استفاده براي شبيه سازي فرآيندهاي مختلف از جمله فرآيندهاي دما بالا همچون جوشكاري دانشمندان و متخصصان، اخيراً به مدلسازي و شبيهسازي كامپيوتري از فرآيند جوشكاري روي آورده اند. دراین مقاله هدف ساخت مدل كامپيوتري از جوشكاري ورق هاي نازك آاومينيومي مي باشد كه نه تنها اين مدل توانايي پيش بيني تغييرفرمها و تنش هاي حاصل از جوشكاري را داشته باشد بلكه بتواند ناپايداري حاصل از كمانش را نيز بررسي نمايد. بدين منظور و با استفاده از نرم افزار به مدلسازي جوشكاري لب به لب پرداخته شده است و نتايج بدست آمده براي آناليزهاي حرارتي و كمانش با آزمايش هاي عملي مقايسه شده است.
ABSTRACT
In this paper, we examine the buckling results of butt welding in thin aluminum sheets of 7075 using three dimensional finite element modeling. Aluminum alloys are subject to extreme forms due to their special thermal properties. The addition of welding material from the electrode during welding to the base unit is based on the method of death and the birth of the elements and the timing of the modeling is considered. For mechanical modeling, Anand’s viscoplastic model is used. A comparison of the variation curves and tensile graphs based on the welding time has been used to determine the local buckling at each point during welding. When a local buckling is detected at a point, it is seen in the graph of the variation of the time form of that jump point without changing the sensitivity in the stress-time graph of that point at the same time. The results of heat modeling and buckling of the piece are compared with the experimental data.
INTRODUCTION
The main problems caused by welding in metal parts are unwanted changes that cause loss of the overall form of the parts. These variations are caused by complex thermal stresses resulting from welding in parts. Among the changes made to the forms formed in the welded tile, buckling is a form of change that suddenly appears without any prior observation and, in terms of quantity, also results in a large change in shape. With the advancement of computers and the emergence of specialized software that can be used to simulate various processes, including high-temperature processes, such as the welding of scientists and experts, they have recently turned to computer simulation and modeling of the welding process. In this paper, the aim is to construct a computer model for welding thin-walled Avonenium sheets, which not only can predict changes in the formations and stresses produced by welding, but also can examine the instability of the buckling. For this purpose, the software has been used to simulate the butt welding, and the results have been compared for thermal analysis and buckling with practical experiments.
Year: 2017
Publisher : 11th National Congress of metallurgy of Iran
By : Hamid Ali Hosseini, Alireza Zare
File Information: persian Language/ 12 Page / size: 1,35 KB
سال : 1396
ناشر : يازدهمين كنگره ملي مهندسين متالورژی ايران
کاری از : حميد علي حسيني ، عليرضا زارع
اطلاعات فایل : زبان فارسی / 12 صفحه / حجم : KB 1,35
نقد و بررسیها
هنوز بررسیای ثبت نشده است.