توضیحات
چکیده
به منظور توليد بهينه و انبوه بتن، يكي از اساسي ترين شاخص ها كه بايد تغيير يابد، طرح اختلاط آن است. هدف از پژوهش حاضر، ارائه يك روش جديد براي طرح اختلاط بتن با استفاده از اصول بهينه سازي ميباشد. البته با توجه به اينكه اين تحقيق بر مبناي مطالعات تئوريك و همچنين آزمايشگاهي است، با در نظر داشتن شرايط ساخت بتن در ايران، مبناي كاربرديتري دارد. بدين منظور ابتدا مدل بهينه سازي طرح اختلاط بتن تعريف ميشود، به صورتي كه تاثير نتايج آزمايشگاهي در آن لحاظ شده باشد. سپس با استفاده از يك الگوريتم بهينه سازي، طرح اختلاط بهينه براي بتن با مقاومت مورد نظر بدست ميآيد. مدل توسعه يافته، قابليت تعميم براي ساير مسائل ( ،منظور تغيير در فرضيات در محدوده هاي قابل قبول) را به سادگي دارا است. نشان داده ميشود كه طرح اختلاط بهينه در حالت حداكثر شدن بزرگترين بعد درشت دانه و در نتيجه حداكثر شدن حجم شن مصرفي بدست ميآيد.
مقدمه
امروزه حجم توليد و استفاده از بتن در سازه ها، حتي در ساختمان هاي معمول مسكوني رو به افزايش است، در حاليكه محدوديت سرمايه هاي موجود شرايط ويژه اي را به وجود آورده است. البته بتن نسبت به ديگر مصالح سازه اي از ديدگاه هاي گوناگون از جمله قابليت كاهش هزينه توليد مزيت دارد. دلايل مذكور سبب اهميت تحقيق بر روي توليد و استفاده بهينه از بتن و تمايل متخصصين به اين موضوع شده است. با در نظر گرفتن توليد انبوه و نيمه انبوه بتن كاهش حتي اندكي از هزينه هاي توليد آن ميتواند بسيار موثر باشد. البته اين كاهش هزينه بايد به صورتي انجام گيرد كه ديگر خصوصيات بتن به ويژه مقاومت فشاري دچار تغييرات منفي نشوند. از جمله مطالعات گذشته براي طرح اختلاط بهينه تحقيقات گسترده يه و همكارانش است. او در سال 2006در پژوهشي هزينه بتن با مقاومت معمولي را با استفاده از الگوريتم ژنتيك كمينه كرده است. وي ابتدا طرح اختلاط را به صورت مسئله بهينه سازي رابطه سازي كرد و دو واحد (ماژول) مدلسازي و بهينه يابي را تشكيل داد. سپس مسئله را با استفاده از واحد (ماژول) بهينه سازي بر پايه برنامه نويسي درجه دو و الگوريتم ژنتيك حل نمود. براي ارزيابي برنامه كامپيوتري حاصل از مجموع اين واحدها، برنامه براي بدست آوردن طرح اختلاط بهينه با رنج اسلامپ 25-5سانتيمتر و مقاومت 55-25مگاپاسكال استفاده گرديد.
ABSTRACT
In order to produce optimum and massive concrete, one of the most fundamental indicators to be changed is its mixing plan. The purpose of this study is to present a new method for concrete mix design using optimization principles. Of course, considering the fact that this research is based on theoretical and experimental studies, considering the concrete conditions in Iran, it is more applicable. For this purpose, the optimization model for the concrete mix design is first defined, in which the effect of the experimental results is included. Then, using an optimization algorithm, an optimal mixing plan for the concrete with the desired strength is obtained. The developed model has the generalizability for other issues (the change in assumptions in acceptable limits). It is shown that the optimum mixing plan is obtained in the case of maximization of the largest coarse dimension and, consequently, the maximum amount of gravel consumed.
INTRODUCTION
Today, the volume of production and use of concrete in structures, even in residential buildings, is increasing, while the limitations of existing capital have created special conditions. Concrete, of course, concrete has different advantages over other structural materials from various perspectives, including the ability to reduce production costs. The reasons for this are the importance of research on the production and optimal use of concrete and the willingness of specialists to this topic. Considering the massive and semi-mass production of concrete, even a small reduction in its production costs can be very effective. Of course, this cost reduction should be done in such a way that other concrete properties, especially compressive strength, are not subject to any negative changes. One of the past studies is the idea of an optimal mix of extensive research and colleagues. In 2006, he minimized conventional resistance cost using a genetic algorithm. He initially mapped the mixing scheme as an optimization problem and formed two units (modules) of modeling and optimization. Then, the problem was solved using an optimization unit (module) based on second-order programming and genetic algorithm. To evaluate the computer program obtained from the total of these units, the program was used to obtain an optimal mix design with a range of 25-4 cm and 25- 55 MPa resistance.
Year: 2011
Publisher : Sixth National Congress on Civil Engineering
By : Alireza Habibi, Hooman Safari, Varia Mohammadi
File Information: persian Language/ 7 Page / size: 305 KB
Only site members can download free of charge after registering and adding to the cart
سال : 1390
ناشر : ششمین کنـگره ملی مهنـدسی عمـران
کاری از : عليرضا حبيبي ، هومن صفّاري ،وريا محمدي
اطلاعات فایل : زبان فارسی / 7 صفحه / حجم : KB 305
نقد و بررسیها
هنوز بررسیای ثبت نشده است.