توضیحات
چکیده
در اين پژوهش پوششي از سرب روي زيرلايه فولادي به روش رسوب فيزيكي بخار (PVD) ايجاد شد و تاثير دماي زيرلايه، فشار گاز محفظه و ولتاژ اعمالي بر بافت و مورفولوژي پوشش ها مورد ارزيابي قرار گرفت. بافت پوشش ها توسط دستگاه پراش پرتو ايكس (XRD) به صورت پارامتر بافت و مورفولوژي پوشش ها توسط ميكروسكوپ الكتروني روبشي (SEM) بررسي شد. نتايج نشان داد كه با افزايش دماي زيرلايه شدت صفحات (200) و (220) افزايش يافته و تخلخل ساختار كاهش مييابد و در دماي بسيار بالا بافت پوشش حالت تصادفي پيدا ميكند و مورفولوژي آن به صورت هم محور در ميآيد. با افزايش فشار گاز محفظه شدت صفحات(200) و (220) افزايش يافته و اندازه دانه ها ريزتر شده در حالي كه با افزايش ولتاژ اعمالي صفحات (111) شدت بيشتري پيدا ميكنند و اندازه دانه ها درشت تر ميشود.
مقدمه
پوشش هاي نازك سرب هنگامي كه بين سطوح لغزشي سخت قرار ميگيرند به علت داشتن صفحات لغزشي متعدد و استحكام برشي كم، موجب كاهش اصطكاك و رواني حركت ميشوند؛ بنابراين ميتوان از آنها به عنوان روانكار جامد استفاده نمود. روانكارهاي جامد فلزي در محيط هاي دماي بالا و خلاء كه امكان تجزيه و تبخير روانكارهاي سيال وجود دارد عملكرد بهتري از خود نشان ميدهند، در برابر تابش هاي مضر پايداري بيشتري دارند و از قابليت هدايت الكتريكي و گرمايي بالايي نيز برخوردارند. پوشش هاي فلزي نرم معمولا به دو روش الكتروشيميايي و رسوب فيزيكي بخار ايجاد ميشوند كه پوشش هاي رسوب فيزيكي بخار به علت انرژي زياد ذرات برخوردي با زيرلايه و در نـتيجه چسبندگي بيشتر به آن روانكاري و عمر سايشي بهتري از خود نشان ميدهند. نياز تكنولوژي هاي مدرن به پوشش هاي روانكار جامد فلزي باعث شده تا تحقيقات زيادي در زمينه بهبود خصوصيات اين پوشش ها صورت گيرد كه در نتيجه آن تاثير ضخامت پوشش، زبري سطح زيرلايه، عناصر آلياژي، نيروي اعمالي و سرعت لغزش مشخص شده است. اما از جمله عوامل ديگر كه برخصوصيات پوشش نظير رفتار تريبولوژيكي و خوردگي اثر ميگذارد بافت پوشش يا جهت مرجح آن است. تحقيقاتي در زمينه بررسي بافت پوشش هاي نيتريد تيتانيم، منيزيم و كروم ايجاد شده به روش رسوب فيزيكي بخار صورت گرفته اما با اين وجود به نظر ميرسد اطلاعات كاملي مبتني بر يافته هاي آزمايش در زمينه پوشش هاي روانكار جامد وجود ندارد.
ABSTRACT
In this study lead thin films were deposited on steel substrate by physical vapor deposition method. The effect of coating parameters such as substrate temperature, gas pressure and applied voltage on texture and morphology were studied. Texture and morphology of coatings were evaluated by X-ray diffraction through measurement of texture parameter and scanning electron microscopy, respectively. Our results showed that increase in substrate temperature cases the intensity of (200) and (220) planes increase and porosity reduces. By increasing the gas pressure, the intensity of (200) and (220) planes increase and the grain size decreases, where as by increasing the applied voltage the intensity of (111) planes and grain size both increase.
INTRODUCTION
Thin-film coatings, when placed between the hard-wearing surfaces, due to their slip plates and low shear strength, reduce the friction and motion of the motor; therefore, they can be used as solid lubricants. Solid metal lubricants in high temperature and vacuum environments, which are capable of decomposition and evaporation of fluid lubricants, show better performance than harmful radiation, and also have high electrical and thermal conductivity. Soft metal coatings are usually produced by two methods of electrochemical and physical deposition of vapor, which the physical vapor deposition coatings exhibit as a result of the high energy of collision with substrate particles and, as a result, more adhesion to it, lubricate and abrasively improve. The need of modern technology for solid lubricant coatings has led to a lot of research on improving the properties of these coatings, which has the effect of coating thickness, surface roughness, alloying elements, applied force and slip speed. But one of the other factors that affects the nature of the coating, such as the strain and corrosion behavior, is the coating texture or preferred direction. Research has been done on the texture of titanium, magnesium and chromium nitride coatings created by the physical vapor deposition method, but there seems to be no complete information based on the results of the experiments on solid lubricant coatings.
Year: 2007
Publisher : 11th National Congress of metallurgy of Iran
By : Benjamin Yarmand, Fakhredin Ashrafizadeh, Mohammad Reza Targhinejad
File Information: persian Language/ 11 Page / size: 1.33 KB
سال : 1386
ناشر : يازدهمين كنگره ملي مهندسين متالورژی ايران
کاری از : بنيامين يارمند ،فخرالدين اشرفي زاده ،محمدرضا طرقي نژاد
اطلاعات فایل : زبان فارسی / 11 صفحه / حجم : KB 1.33
نقد و بررسیها
هنوز بررسیای ثبت نشده است.