توضیحات
چکیده
توليد نانوكامپوزيت Al2O3/Moتوسط واكنش جانشيني آلومينوم و اكسيد موليبدنيم صورت گرفت. بدين منظور پودر MoO3 ،Alو Al2O3در آسياب پرانرژي SPEX8000با نسبتها و زمانهاي مختلف آسياب گرديد. آناليز تشكيل فازها و محاسبه اندازه دانه ها توسط پراش پرتو xو ريزساختار و مورفولوژي توسط ميكروسكوپ الكتروني روبشي بررسي گرديد. نتايج نشان داد كه پس از زمان شخصي از آسياب كاري واكنش شروع شده و به صورت احتراقي خودبرقرار تا كامل شدن واكنش ادامه مييابد. مكانيزم واكنش براساس ثبت دماي محفظه برحسب زمان آسياب كاري بدست آمد. كمترين اندازه دانه Al2O3و Moبهترتيب 60و 28نانومتر بدست آمد. مشاهدات ريزساختاري ي م كروسكوپ الكتروني روبشي تغ رات مورفولوژي را در حين آسياب كاري نشان یدهد.
مقدمه
توليد كامپوزيتهاي زمينه سراميكي تقويت شده با فلز از دو دهـه اخيـر مـورد توجـه قـرار گرفتـه اسـت. كامپوزيتهايي از قبيل Al2O3/W , Al2O3/Mo , Al2O3/Ni , ZrO2/Mo وبا روشهای مختلف با موفقيت توليد شده اند. در اين كامپوزيتها فاز فلزي تا حد زيادي دربهبود چقرمگي سـراميك نقش داشته است. به علاوه در صورتي كه از فلزات ديرگداز (ماننـد Mo ،Wو Ta)اسـتفاده شـود بهبـود استحكام نيز گزارش شده است. مسئله بسيار مهم در ساخت كامپوزيت با فاز تقويت كننده ذره اي، ريز بودن و يكنواختي توزيع آن اسـت تا خواص مطلوب بدست آيد. در اين راستا مفهوم نانوكامپوزيت و ايجاد ساختار بسيار ريز ذرت زمينـه و تقويت كننده در كنار هم از جايگاه ويژهاي برخوردار است.که با انرژی مکانیکی حاصـل از آسیاب کاری انجام گیرد و روش مناسبي براي سنتز انواع مختلف نانوكامپوزيتها، تركيبات آلی وغیر آلی اكسيدها و تركيبات بين فلزي است. واكنشهای متنوع مكانوشیمیایی بین یک فلز و اكسيد فلز ديگر در مراجع گزارش شده اسـت و حاصـل آن مـواد كـامپوزيت میکرو و نـانو كريـستالي مـيباشـد .این دسـته از واكـنشهـا در ابتـدا توسـط مك کرمیک و شافر در احیای اكسيد مس توسط كلسیم (با انتالپی تشکیل 473-کیلوژول برمول) مورد استفاده قرار گرفت. همچنين احیای اكسيد آهن توسـط آلومينـوم بـراي توليـد نانوكامپوزيـت های مغناطیسی توسط تاكاس مورد بررسي واقع شد.
ABSTRACT
The production of Al2O3 / Mo nanocomposites was carried out by substitution of aluminum and molybdenum oxide. For this purpose, MoO3, Al and Al2O3 powder was grinded in different sizes and proportions in the SPEX8000 power grinder. Phase formation analysis and grain size estimation by x-ray diffraction and microstructure and morphology were investigated by scanning electron microscopy. The results showed that after a personal time, the reaction began and the reaction proceeds as a combustion burner until completion of the reaction. The reaction mechanism was based on the temperature recording of the chamber based on the milling time. The minimum grain size of Al2O3 and Mo was obtained at 60 and 28 nm respectively. Microstructural observations of the scanning electron microscope show morphological changes during milling.
INTRODUCTION
The production of reinforced metal ceramic composites has been considered in recent decades. Composites such as Al2O3 / W, Al2O3 / Mo, Al2O3 / Ni, ZrO2 / Mo and various methods have been successfully produced. In these composites, the metal phase greatly contributed to the improvement of ceramic toughness. In addition, refractory metals (such as Mo, W and Ta) have been reported to improve strength. It is a very important issue in making a composite with a particle reinforcing phase, the fineness and uniformity of its distribution to achieve the desired properties. In this regard, the concept of nanocomposite and the creation of a microstructure of microstructure and reinforcement alongside a special place has to be done with the mechanical energy derived from the mill and a suitable method for the synthesis of various types of nanocomposites, organic compounds and non-organic oxides and compounds Intermetallic. Various mechanochemical reactions between a metal and another metal oxide have been reported in the references, resulting in micro and nano-crystalline composite materials. These reactions were first initiated by McKeremic and Schaffer in the reduction of copper oxide by calcium (with an enthalpy of 473 kJ Bromol) was used. Also, the reduction of iron oxide by aluminum was investigated for the production of magnetic nanocomposites by Takas.
Year: 2007
Publisher : 11th National Congress of metallurgy of Iran
By : Akbar Heidarpour, Mohammad Hossein Enayati, Fathollah Karamizadeh
File Information: persian Language/ 9 Page / size: 1,09 KB
سال : 1386
ناشر : يازدهمين كنگره ملي مهندسين متالورژی ايران
کاری از : اكبر حيدرپور ،محمد حسين عنايتي ،فتح اله كرمي زاده
اطلاعات فایل : زبان فارسی / 9 صفحه / حجم : KB 1,09
نقد و بررسیها
هنوز بررسیای ثبت نشده است.