توضیحات
چکیده
در دو دهه اخيرتحقيقات زيادي در مورد طراحي لرزه اي سازه ها صورت گرفته طوريكه آيين نامه هاي طراحي لرزه اي دستخوش تغييرات شده اند. با توجه به خسارات جاني و مالي ناشي از زلزله هاي گذشته، طراحي بر اساس پارامترهاي مقاومت وشكل پذيري به تنهايي جهت رسيدن به طرحي مقاوم در برابر زلزله كافي نمي باشد. اثرچرخه هاي هيسترزيسكه به نوعي بيانگرميزان اتلاف انرژي ناشي از تغييرشكل هاي غيرالاستيك و رفت وبرگشتي دراعضاي سازه اي بوده بطورجدي موردتوجه قرارگرفته نمي شود. عدم توجه به اثرات اين مشخصه مهم در هنگام زلزله باعث بروز تمركز خسارت و در واقع تشكيل طبقه ي نرم در سازه مي شود. دراين مقاله طرح بهينه سازه هاي بتن آرمه دربرابرزلزله با استفاده از الگوريتم بهينه- سازي جامعه پرندگان ارائه شده است طوريكه بر اساسآن توزيع انرژي هيسترتيك در اعضاي سازه اي وطبقات سازه يكنواخت و بهينه باشد. شاخص خسارت پارك و انگ كه تركيبي خطي از تغيير شكل هاي ماكزيمم و اثرانرژي هيسترتيك مي باشد معياري براي كنترل طرح در نظرگرفته شده است. نهايتاً در چهارچوب فرآيند بهينه سازي و پس از انجام تحليلهاي ديناميكي غيرخطي مكرر طرح بهينه لرزه اي يك قاب سه طبقه بتن آرمه در برابر ركورد زلزله نورتريج 1994ارائه شده است.
مقدمه
روش طراحي لرزه اي بر اساس مقاومت از روش هاي سنتي طراحي بحساب مي آيد. در اين روش نياز مقاومت سازه با استفاده از تركيب هاي مختلفي از بارهاي جانبي لرزه اي و بارهاي ثقلي برآورد مي شود. اعضاء سازه اي به گونه اي طرح مي شوند كه ظرفيت مقاومت آنها با احتساب ضرايب كاهش مقاومت، از نياز مقاومتي ناشي از بارگذاري بزرگتر باشد. پس از وقوع زلزله هاي مخرب اخير به عنوان مثال زلزله نورتريج 1994سازه هاي ساختماني طراحي شده بر اساس مقاومت رفتار مناسبي ازخود نشان ندادند و خرابي هاي زيادي را متحمل شدند. هر چند در مناطق زلزله خيزعلاوه بر پارامتر مقاومت، پارامتر شكل پذيري تاثير بسزايي در طراحي لرزه اي دارد اما خسارات وارده به سازه ها نشان مي دهد كه طراحي بر اساس پارامترهاي مقاومت وشكل پذيري به تنهايي جهت رسيدن به طرحي مقاوم در برابر زلزله كافي نمي باشند. لذا بيان رفتار اجزاي سازه از طريق اين پارامترها به تنهايي كافي نيست.
ABSTRACT
In the last two decades, there has been a lot of research on seismic design of structures, as the seismic design rules have undergone a change. Due to the financial and financial losses caused by past earthquakes, designing based on resistance and flexibility parameters alone is not enough to achieve an earthquake resistant design. The effect of hysteresis cycles, which in some way indicates the loss of energy due to changes in non-auscultation patterns and going back and forth in structural terms, has not been seriously addressed. Failure to pay attention to the effects of this important feature during an earthquake causes the loss of focus and indeed the formation of a soft floor in the structure. In this paper, the optimal design of reinforced concrete structures along the seams using an optimization algorithm for bird communities is presented, based on which the distribution of hysteric energy in structural members and structural structures is uniform and optimal. The Park & Eng Damage Index, which is a linear combination of maximum variation and hysterical effects, is a criterion for controlling the design. Finally, in the framework of the optimization process and after repeated nonlinear dynamic analysis, a seismic optimal design of a three-story reinforced concrete frame is presented against the Northridge earthquake record 1994.
INTRODUCTION
Seismic design is based on resistivity from traditional design methods. In this method, the structural strength requirement is estimated using various combinations of seismic lateral loads and gravity loads. Structural members are designed in such a way that their resistive capacity, taking into account the resistance coefficients, is greater than the resistance demand arising from the loading. After recent earthquakes, for example, the 1994 earthquake of Northbridge, constructed structures did not show a proper behavior on the basis of resistance, and suffered a lot of damage. However, in high quake areas, in addition to the resistance parameter, the ductility parameter has a significant effect on seismic design, but the damage to structures shows that design based on resistance and formability parameters alone is not enough to achieve an earthquake resistant design. . Therefore, expression of the behavior of the structural components through these parameters alone is not enough.
Year: 2011
Publisher : Sixth National Congress on Civil Engineering
By : Sajad Gharabaghi, Isa Salajeghet
File Information: persian Language/ 8 Page / size: 1.20 KB
Only site members can download free of charge after registering and adding to the cart
سال : 1390
ناشر : ششمین کنـگره ملی مهنـدسی عمـران
کاری از : سجاد قره باغي ،عيسي سلاجقه
اطلاعات فایل : زبان فارسی / 8 صفحه / حجم : KB 1.20
نقد و بررسیها
هنوز بررسیای ثبت نشده است.