توضیحات
چکیده
در اين پژوهش نانو ذرات اكسيد آلومينيوم كه به روش پلاسماي حرارتي توليد شـده مـورد بررسي قرار گرفته است. جهت بررسي اندازه دانه ايـن ذرات از روي طـرح پـراش اشـعه ايكـس از سـه روش شـرر، ويليام سون- هال و وارن- آورباخ استفاده شد. ذرات به صورت كـروي فـرض شـده انـد و توزيع اندازه ذرات به صورت لگاريتمي- نرمال مي باشد. توزيع انـدازه ذرات بـا اسـتفاده از نتايج حاصل از طرح پراش اشعه ي ايكـس محاسـبه شـد كـه ايـن نتـايج بـا نتـايج حاصـل از ميكروسكوپ الكتروني عبوري (TEM) مطابقت دارد.
مقدمه
آلومينا بدليل خواص مكـانيكي و دمـا بـالاي خـوبي كـه از خـود نشـان مـي دهـد ، يكـي از پركاربردترين مـواد سـراميكي اسـت بطوريكـه گفتـه مـي شـود جايگـاه آلومينـا در صـنعت سراميك مشابه جايگاه فولاد در صنعت متالورژي است. پودر نانوسايز آلومينا بدليل كـاهش ابعاد عيـوب و دمـاي زينترينـگ و در نتيجـه بهبـود خـواص مكـانيكي و افـزايش چقرمگـي كاربرد گسترده اي در صنعت پيدا كرده است. چون ريزساختار و خواص مكانيكي قطعات توليد شده متاثراز اندازه ذرات مي باشـد بنـابران تعيين اندازه ذرات از اهميت ويژه اي برخوردار است. اندازه دانه پودر نانو سايز آلومينـا با استفاده از ميكروسكپ الكتروني عبوري قابل انـدازه گيـري اسـت ولـي ايـن روش بسـيار پرهزينه و زمان بر است، همچنين حجمي كه توسط ميكرسكوپ قابل اندازه گيري اسـت در مقايسه با كل حجم نمونه بسيار اندك است. در مقابل آزمايش پراش اشعه ايكـس سـريع و كم هزينه است و حجم بيشتري از نمونه مورد بررسي قرار مي گيرد، همچنـين امـاده سـازي نمونه نيز بسيار راحتتر است. كريل 1و برينگر 2روشي را براي تعيين توزيع اندازه دانه پيشـنهاد دادنـد كـه در آن از تبـديل فوريه نمودارالگوي پراش اشعه ايكس استفاده مي شود. با استفاده از اندازه دانه سطحي 3و حجمي 4كه بـه ترتيـب از روش وارن-آوربـاخ 5و ويليـام سون- هال 6بدست آمده اند مي توان نمودار توزيع اندازه دانه را بدست آورد.
ABSTRACT
In this study, aluminum oxide nanoparticles produced by thermal plasma method have been investigated. To evaluate the grain size of these particles, X-ray diffraction patterns were used in three methods: Sherr, William Son-Hall and Warren-Auerbach. Particles are assumed to be spherical and the particle size distribution is logarithmically normal. The particle size distribution was calculated using the results of the X-ray diffraction scheme, which is consistent with the results of the transient electron microscope (TEM).
INTRODUCTION
Alumina is one of the most popular ceramic materials due to its mechanical properties and high temperatures. Alumina in the ceramic industry is said to have the same status as steel in the metallurgical industry. Alumina nanosized powder has been widely used in the industry due to diminished dimensions of imperfections and zaintering temperatures and, as a result, improved mechanical properties and increased toughness. Because the microstructure and mechanical properties of the parts produced are affected by the particle size, particle size determination is very important. The size of the nanosized powder of alumina can be measured using a transmitted electron microscope, but this method is very costly and time consuming. Also, the volume measured by the microscope is very small compared to the total sample size. In contrast, the X-ray diffraction test is fast and cost-effective, and more volume of the sample is examined, and it is much easier to sample the sample. Kearl 1 and Bringer 2 proposed a method for determining the grain size distribution in which the X-ray diffraction diagram is used. The grain size distribution graph can be obtained using the size of the surface grains 3 and volume 4, which are obtained from the Warren-Aurbach 5 and William Son-Hall 6 methods, respectively.
Year: 2007
Publisher : 11th National Congress of metallurgy of Iran
By : Narges Asadpour -Pirooz Marashi -Babak Akbari
File Information: persian Language/ 9 Page / size: 437 KB
سال : 1386
ناشر : يازدهمين كنگره ملي مهندسين متالورژی ايران
کاری از : نرگس اسدپور -پيروز مرعشي -بابك اكبري
اطلاعات فایل : زبان فارسی / 9 صفحه / حجم : KB 437
نقد و بررسیها
هنوز بررسیای ثبت نشده است.