توضیحات
چکیده
اتصال آلياژ زيركونيوم به فولاد زنگ نزن از مهم ترين اتصالات در صنعت هسته اي است ، به همين جهت تلاش هاي زيادي جهت دستيابي به يك اتصال مناسب به روش هاي گوناگون ازجمله Diffusion Bondingو يا استفاده از لايه هاي مياني از جنس فلزات Tiو يا آهن خالص صورت گرفته است.اما تشكيل فازهاي ترد در منطقه اتصال و همچنين اختلاف ضريب انبساط حرارتي آلياژ زيركونيوم و فولاد زنگ نزن مانع دستيابي به يك اتصال مناسب گشته است. در پژوهش حاضر هدف دستيابي به يك اتصال مناسب بين آلياژ زيركونيوم و فولاد زنگ نزن به روش لحيم كاري سخت و با استفاده از يك لايه واسط آمورف به ضخامت 50ميكرو متر است. نتايج آزمايشات نشان مي دهد كه كنترل نرخ سرمايش و گرمايش و نگهداري به مدت 20دقيقه در دماي 860درجه سانتي گراد ، س ب دستيابي به يك اتصال مناسب مي گردد.
مقدمه
مواد سازنده راكتورهاي هسته اي را طيف گسترده اي از فولادهاي كربني، كم آلياژ و پر آلياژ، فولادهاي زنگ نزن اعم از آستنيتي نظير ،321 ،316 ،304آلياژهاي پايه نيكل، آلياژهاي زير كالوي و غيره تشكيل مي دهند. اين نوع مواد سازنده به راحتي جوش پذير هستند و با فرايندهاي جوشكاري تداول نظير جوشكاري قوسي با الكترود پوشش دار ،(SMAW) جوشكاري قوسي تحت گاز خنثي ،(GTAW)جوشكاري قوسي زيرپودري ، (SAW)جوشكاري با پرتو الكتروني (EBW) جوشكاري با پرتو ليزر ،(LBW) مقاومتي و غيره به خوبي به يكديگر اتصال داده مي شوند. مشكلات اتصال دادن اين متريال هاي ساختاري كه در ساخت تأسيسات هسته اي به وفور بكار گرفته مي شوند . موقعي آغاز مي شود كه بخواهيم آلياژهاي زير كونيوم را به متريال ساختاري ديگر نظير فولادهاي زنگ نزن و يا فولادهاي كربني جوشكاري نماييم. در راكتورهاي هستنه اي كه سوخت از غناي طبيعي برخوردار است، طراحان به منظور جلوگيري از كاهش بيش از حد شدت فلاكس نوترون در قلب راكتور سعي مي نمايند كمترين حجم و وزن مواد سازنده را بكارگيرند و از موادي استفاده كنند كه از جذب نوتروني بسيار كمي برخوردار هستند. آلياژهايي نظير زيركونيوم و در موارد قابل قبولي، آلياژهاي پايه Alنظير سري 5000و يا آلياژهاي منيزيم جنس غلاف سوخت را تشكيل مي دهند.
ABSTRACT
The bonding of zirconium alloy to stainless steel is one of the most important connections in the nuclear industry. Therefore, many efforts have been made to achieve a proper connection in a variety of ways, including Diffusion Bonding, or the use of middle layers of Ti or pure iron However, the formation of crisp phases in the binding zone and also the difference in the thermal expansion coefficient of zirconium alloys and stainless steel prevents a suitable connection. In the present study, the aim is to achieve a suitable bonding between zirconium alloys and stainless steel using a hard soldering method and using a layer of amorphous interface of 50 μm thickness. The results of the experiments indicate that the control of the cooling and heating rate for 20 minutes at 860 ° C would result in a suitable connection.
INTRODUCTION
Nuclear reactor materials are made up of a wide range of carbon steel, low alloy and alloy alloys, stainless steels, such as 321, 316, 304 nickel base alloys, substrate alloys, and so on. This type of material is easily welded and is characterized by welding processes such as arc welding with coated electrode (SMAW), arc welding under neutral gas (GTAW), arc welding (SAW), electron beam welding (EBW) welding Laser beam, (LBW) resistance, etc., are well connected to each other. The problems of connecting these structural materials to the construction of nuclear facilities are abundantly used. It starts when we want to make subconjunctible alloys to other structural metrics such as stainless steels or carbon steel. In natural-powered fuel reactors, designers try to use the least volume and weight of the material and to use materials that have very little neutron absorption in order to prevent excessive neutron flux reduction at the heart of the reactor. are. Alloys such as zirconium and, in acceptable cases, Al-base alloys, such as the 5000 series, or magnesium alloys make up the fuel sheath.
Year: 2007
Publisher : 11th National Congress of metallurgy of Iran
By : Ebrahim Heshmat Dehkordi, Mehdi Sabouhi, Gholamreza Ahmadpour, Majid Zahraie
File Information: persian Language/ 10 Page / size: 814 KB
سال : 1386
ناشر : يازدهمين كنگره ملي مهندسين متالورژی ايران
کاری از : ابراهيم حشمت دهكردي ، مهدي صبوحي ، غلامرضا احمد پور ، مجيد زهرايي
اطلاعات فایل : زبان فارسی / 10 صفحه / حجم : KB 814
نقد و بررسیها
هنوز بررسیای ثبت نشده است.