توضیحات
چکیده
در اين تحقيق به منظور پوشش دهي روي در سطح زي ير لا ه فولاد كم كربن پوليش الكتر كي ي و مكانیکی شده از دانسيته جريان هاي 100 ،10و 200 mA/cm2استفاده شد. مرفولوژي و بافت پوشش الكتریکی روي حاصل از حمام سولفاتي شامل 10 ppmناخالصي+ Sn2توسط آناليز تفرق اشعه ايكس (XRD) و میكروسكوپ الكتروني روبشي (SEM) مورد مطالعه قرار گرفت. نتایج نشان داد كه مرفولوژي و بافت رسوب روي تحت تاثير افزودني +، Sn2آماده سازي سطح و دانسيته جريان قرار مي ي گ رند بطوريكه بر روي سطوح يپول ش الكتر كي ي شده مولفه بافت غالب 00.2}بود و مرفولوژي سطحي رسوبات به شكل لايه اي متراكم مشاهده شد درحاليكه در سطوح آماده سازي شده به روش مكانیکی صفحات هرمي كم زاویه {10.4}{10.3}{11.4} و صفحه منشوري {11.0} مولفه غالب بافت بودند و مرفولوژي رسوبات مشاهده شده به صورت اسفنجي بود. مطالعات مدل جوانه زني رسوبات توسط مدل Scharifkerدر شرايط مختلف بررسي شد. ارتباط بين جوانه زني بافت و مرفولوژي رسوبات روي تحت تاثیر ناخالصي 2+Sn مورد مطالعه و بحث قرار گرفت.
مقدمه
رسوب دهي الكتریکی فرايند پيچيده اي است كه تحت تاثير عوامل مختلفي همچون دما، ،pH دانسيته جريان رسوب دهي، نوع جريان اعمالي ،(DC , PC) آماده سازي سطح، نوع حمام و ناخالصي ها و افزودني هاي موجود در حمام قرار ميگیرد. مشخص شده است كه مرفولوژي و بافت پوشش روي تاثیر قابل توجهي بر مقاومت به خوردگي و شكل پذیری این نوع پوشش ها دارد .رئیسی و همكاران تاثير آماده سازي سطح، دما، pHو دانسيته جريان رسوب دهي را بر مكانيزم جوانه زني و رشد و نیز مرفولوژي و بافت رسوبات روي را بررسي نموده و بیان كردند صفحات {00.2} در نتيجه جوانه زني سه بعدي و رشد جانبي رسوبات بر سطح زي يرلا ه به وجود مي ي آ ند درحاليكه بافت غيرفایبر هرمي در نتیجه رشد دوبعدی ( رشد اپيتكسیال ) رسوبات بر روي میكرو پله هاي سطح حاصل مي شود.
ABSTRACT
In this research, zinc coatings were used for zinc coatings of low carbon electrically polished and mechanized polishes of 100, 10 and 200 mA / cm2 currents. The morphology and tissue coating of the electrical coating on the sulfate bath containing 10 ppm impurities + Sn2 were investigated by X-ray diffraction (XRD) and scanning electron microscopy (SEM). The results showed that the morphology and zinc sedimentation were influenced by the additive +, Sn2 surface preparation and flow density, which was dominated by electrophoresis on the surface of the electrolyte pulp and the surface texture of the sediments was dense in a layer of dense layer It was observed that in the mechanically prepared surfaces, the low-angle pyramid plates {10.4} {10.3} {11.4} and prorate plates {11.0} were dominant components of the tissue and the morphology of the observed sediments was sponge. Sediment germination model studies by Scharifker model were studied under different conditions. The relationship between texture germination and morphology of zinc sediments under the influence of 2 + Sn impurity was studied and discussed.
INTRODUCTION
Electrical deposition is a complicated process that is affected by various factors such as temperature, pH, density of depositional current, applied current type, (DC, PC) surface preparation, type of bath and impurities and additives in the bath. It has been shown that the morphology and texture of the coating have a significant effect on the corrosion resistance and the shape of these types of coatings. Rayie et al., Described the effect of surface preparation, temperature, pH and density of sedimentation on the germination and growth mechanism as well as morphology And examined the texture of zinc deposits and stated that the plates {00.2} were formed as a result of three-dimensional germination and lateral growth of the sediments on the surface, while the pyramidal non-phytoremedic tissue formed as a result of two-dimensional growth (epithelial growth) of sediments on Micro-stairs of the surface are obtained.
Year: 2007
Publisher : 11th National Congress of metallurgy of Iran
By : Babak Perrin, Keivan Raisey, Ahmad Saatchi
File Information: persian Language/ 13 Page / size: 1,15 KB
سال : 1386
ناشر : يازدهمين كنگره ملي مهندسين متالورژی ايران
کاری از : بابك پرن,کیوان رئیسی, احمد ساعتچي
اطلاعات فایل : زبان فارسی / 13 صفحه / حجم : KB 1,15
نقد و بررسیها
هنوز بررسیای ثبت نشده است.