توضیحات
چکیده
سازه هاي بتن مسلح ساخته شده را میتوان با استفاده از روشهاي غلافبندي (ژاکتینگ) تقویت نمود. در حال حاضر سه روش رایج براي تقویت ستون هاي بتن مسلح موجود میباشد که عبارتند از: استفاده از بتن مسلح، بکارگیري پروفیلها و ورق هاي فولادي و استفاده از مصالح کامپوزیتی (FRP). تمامی این سه روش تقویت سازه ملزم به درك جامع از رفتار بتن محصور میباشد. در این مقاله، چند مدل موجود براي بتن محصور معرفی شده و سپس آن مدلها براي پیش بینی رفتار ستون هاي آزمایش شده توسط Millerمورد استفاده قرار میگیرد. مدلهاي بتن محصور ابتدا براي ستون هاي اولیه (تقویت نشده) Millerبکار گرفته شده و سپس، قابلیت کاربرد آنها براي نمونه هاي غلاف بندي شده با بتن مورد مطالعه قرار میگیرد. مدلهاي موجود براي ستون هاي تقویت شده با بتن، مقاومت و ظرفیت شکل پذیري این ستونها را بطور قابل قبولی ارائه نمیدهند. جهت پیش بینی بهتر رفتار ستونهاي تقویت شده با غلاف بتن مسلح، مدل جدیدي پیشنهاد میگردد. این مدل پیشنهادي براي نمونه هاي غلاف بندي شده Millerمورد استفاده قرار گرفت که مقاومت این ستونها را به صورت قابل قبولی پیش بینی مینماید.
مقدمه
با افزایش سن سازه هاي بتن مسلح، اثرات زیان آور گوناگونی میتواند در آنها رخ دهد. این اثرات میتواند شامل خرد شدن، پوسته پوسته شدن یا ترك خوردگی بتن و همچنین زنگزدگی و خوردگی آرماتور فولادي باشد. عوامل نام برده و یا عوامل دیگر، میتوانند به طور قابل توجهی مقاومت اعضاي سازه اي را تحت تاثیر قرار دهند. در اعضایی که نشانی از این عوامل دیده شود، میتواند با یکی از روشهاي صحیح مرمت سازه، بهسازي گردد. بهسازي معمولا به دو دلیل انجام می پذیرد: مرمت سازه و تقویت سازه (مقاوم سازي). مرمت سازه عبارت از عملیاتی است که جهت تعمیر عیوب سازه انجام میگیرد. همچنین میتواند براي اعضاي سازه اي قدیمی و کهنه که بنا به دلایلی، مقاومت طراحی اولیه را برآورده نمیکنند، ضروري باشد. مقاوم سازي سازه عبارت از عملیاتی است که ظرفیت باربري یک عضو سازه اي را افزایش میدهد. در حالتی که در طول عمر بهره برداري از سازه، نیروي تحمل شده توسط عضو سازه اي تغییر یابد و یا استانداردهاي طراحی نوین، جزئیات آرماتوربندي بیشتر و فشرده تري را ضروري بداند، مقاوم سازي سازه نیز ضروري به نظر میرسد.
ABSTRACT
Structural reinforced concrete structures can be reinforced by the use of jackets. Currently, there are three common ways to reinforce existing reinforced concrete columns: the use of reinforced concrete, the use of profiles and sheets of steel and the use of composite materials (FRP). All these three structural reinforcement methods are required to comprehend a comprehensive understanding of concrete behavior. In this paper, several models are proposed for enclosed concrete, and then those models are used to predict the behavior of the columns tested by Miller. Enclosed concrete models are first applied to Miller’s primary columns (not reinforced) and then, their applicability to concrete pods samples is studied. Available models for reinforced concrete columns, strength and ductility are not acceptable for these columns. A new model is proposed to better predict the behavior of reinforced pillars reinforced pillars. The proposed model was used for Miller’s pod-shaped specimens to predict the strength of these columns.
INTRODUCTION
With increasing age of RC structures, various harmful effects can occur. These effects can include crushing, scaling or cracking of concrete, as well as rust and corrosion of steel reinforcement. The mentioned factors or other factors can significantly affect the resistance of structural members. In members who see these factors, they can be upgraded with one of the proper methods of repairing the structure. Improvement is usually done for two reasons: structural restoration and structural strengthening (retrofitting). Structural restoration is an operation that is carried out to repair structural defects. It can also be needed for old and old construction members who for some reason do not meet the design’s initial design resistance. Strengthening the structure is an operation that increases the carrying capacity of a structural member. Structural reinforcement is also considered necessary if structural engineering is tolerated by a structural member during the lifetime of the construction, or with new design standards, it is necessary to consider the details of the reinforcement to be more and more compact.
Year: 2011
Publisher : Sixth National Congress on Civil Engineering
By : Ibrahim Khalilzadeh Vahidi, Behrooz Dadmand, Javad Faramarzi Khaneghah
File Information: persian Language/ 8 Page / size: 416 KB
Only site members can download free of charge after registering and adding to the cart
سال : 1390
ناشر : ششمين كنـگره ملي مهندسی عمـران
کاری از : ابراهیم خلیل زاده وحیدي ، بهروز دادمند ، جواد فرامرزي خانقاه
اطلاعات فایل : زبان فارسی / 8 صفحه / حجم : KB 416
نقد و بررسیها
هنوز بررسیای ثبت نشده است.