توضیحات
چکیده
یکی از روشهاي مقاوم سازي ساختمان در مقابل بارهاي جانبی استفاده از سیستم بادبندي (همگرا یا واگرا) می باشد. شکل هاي متداول بادبندهاي همگرا مشکلات زیادي را در تامین فضاي بازشوهاي ساختمان بوجود می آورند، از اینرو در بعضی مواقع براي تامین فضاي کافی جهت بازشوها از بادبند دروازه اي استفاده می شود. عدم وجود ضوابط مدون در آئین نامه هاي موجود براي طراحی لرزه اي این سیستم مهاربندي، ضرورت بررسی عملکرد قاب هاي مهاربندي شده با بادبند دروازه اي را مشخص می کند. در این مقاله ضمن طراحی 5ساختمان کوتاه مختلف براساس مبحث دهم مقررات ملی ساختمان، استاندارد 2800و بکارگیري مطالعات قبلی، سطح عملکرد 10قاب از 5ساختمان مذکور به روش طیف ظرفیت مورد بررسی قرار گرفته است.
مقدمه
در روشهاي متداول براي مقابله با بارهاي جانبی در قابها معمولا از دو سیستم قاب خمشی و مهاربندي استفاده می شود. سیستم هاي مهاربندي به علت سهولت اجرا، سختی قابل ملاحظه و هزینه پایین از محبوبیت بیشتري برخوردار هستند. سیستم هاي مهاربندي معمولا به دو صورت همگرا و واگرا اجرا می گردند. مهاربندهاي واگرا به علت فراهم نمودن امکانات معماري بیشتر، شکل پذیري و قابلیت جذب انرژي بالا در بسیاري از موارد جهت مقاوم سازي ساختمان ها از موفقیت بیشتري برخوردار هستند. لیکن مسائل اجرایی و در برخی از موارد هزینه بالا در تیر رابط باعث می گردد مهندسین تمایل بیشتري به استفاده از مهاربند هاي همگرا از خود نشان دهند.بادبند دروازه اي از نوع بادبندهاي همگرا می باشد. این نوع بادبند از لحاظ تامین فضاي کافی جهت بازشوها در ساختمان نسبت به بادبندهاي همگراي دیگر ارجحیت دارد ولی سختی آن کمتر و تمایل بیشتري به کمانش خارج از صفحه دارد.
ABSTRACT
One of the methods of building resistance to lateral loads is using a bracing system (convergent or divergent). Common forms of convergent braces create many problems in providing space openings, thus, at times, gates can be used to provide sufficient space for openings. The lack of codified rules in the existing codes for seismic design of this bracing system specifies the necessity of examining the performance of gate guards framed. In this paper, while designing five different building structures based on the 10th National Building Regulations, Standard 2800 and the use of previous studies, the performance level of 10 frames of the five buildings has been investigated by the capacity spectrum method.
INTRODUCTION
In conventional methods, to counter the side loads in the frames, usually two frames and curtain frame systems are used. The bracing systems are more popular due to their ease of implementation, considerable difficulty and low cost. The bracing systems are usually implemented in a convergent and divergent manner. Divergent braces are more likely to succeed in providing more architectural, ductility and high energy absorption capabilities in many cases. However, executive issues and, in some cases, high costs in the interface bar, make engineers more inclined to use converging braces. It’s a gateway of converging braces. This type of bracket is preferred in terms of providing sufficient space for the openings in the building compared to other convergent braces, but its hardness is less and it tends to bounce off the screen.
Year: 2011
Publisher : Sixth National Congress on Civil Engineering
By : Arash Naderi, Mohammad Reza Sohrabi
File Information: persian Language/ 7 Page / size: 469 KB
Only site members can download free of charge after registering and adding to the cart
سال : 1390
ناشر : ششمین کنـگره ملی مهنـدسی عمـران
کاری از : آرش نادري ،محمد رضا سهرابی
اطلاعات فایل : زبان فارسی / 7 صفحه / حجم : KB 469
نقد و بررسیها
هنوز بررسیای ثبت نشده است.