توضیحات
چکیده
در اين تحقيق هدف ايجاد پوشش هاي كامپوزيتي نيكل كربن به روش آبكاري الكتريكي بود. اثر پارامترهايي مانند دانسيته جريان، دماي حمام آبكاري و غلظت كربن در حمام آبكاري بر مورفولوژي و زبري سطح اين پوشش ها بررسي شد. ميكروسكوپ نوري و ميكروسكوپ الكتروني (SEM) براي بررسي مورفولوژي پوشش ها استفاده شدند. اين پوشش هاي كامپوزيتي متراكم هستند و دانه هاي نيكل در آنها گرد و ريز مي باشد. افزايش غلظت كربن در حمام از / 5g l i tتا / 30g l i tمنجر به كاهش زبري سطح مي شود. افزايش بيشتر غلظت كربن در حمام باعث افزايش زبري سطح مي شود. اين پديده را مي توان به توده اي شدن ذرات كربن در پوشش نسبت داد.
مقدمه
آبكاري الكتريكي پوشش كامپوزيتي روشي است كه مي توان با آن ذرات ريز غير فلزي را داخل زمينه فلزي يا آلياژي به منظور بهبود خواص سطح رسوب دهيم. پوشش هاي كامپوزيتي شامل زمينه فلزي همراه با ذرات ريز(عمدتاً اكسيدها يا كاربيدها) در سالهاي اخير گسترش يافته و پوشش هايي با خواص منحصر بفرد را ايجاد كرده .اند بيشترين كار انجام شده در اين زمينه در جهت توليد پوشش هاي سخت، مقاوم به خوردگي، مقاوم به سايش و سيستم هاي خود روانكاري بوده است. چنين پوشش هايي در زمينه هاي مختلفي از تكنولوژي مانند اجزاي دستگاه ها، ماشين آلات، صنعت هاي اتومبيل و هواپيما مورد نيازهستند. پوشش دهي همزمان ذره هاي غير فلزي و فازهاي فلزي باعث بهبود در چندين خواص فيزيكي و مكانيكي پوشش مي شود. نيكل، مس و كروم عمدتاً به عنوان فلز زمينه استفاده شده اند. ذرات سراميكي استفاده شده شامل Wc ،MoS2 ،TiO2 ،Cr2O3 ،SiC ،Al2O3و… مي باشند، همچنين ذرات پليمري مانند PTFEو PEبراي كاهش ضريب اصطكاك سطح كامپوزيت استفاده شده اند. ذرات سراميكي مانند SiCبراي ايجاد مقاومت به سايش و ذرات MoS2و PTFEبراي روانكاري استفاده شده اند. به دليل استفاده وسيع از Niبه عنوان پوشش محافظ، پوشش هاي كامپوزيتي Niبسيار مورد بحث قرار گرفته اند. ذرات زيادي مانند اكسيدهاي سخت TiO2 ،Al2O3 ،SiO2و ذرات SiCوارد پوششهاي نيكلي شده اند كه سختي و مقاومت به سايش آن را بهبود مي دهند.
ABSTRACT
In this research, the purpose of composite nickel carbon coatings was electric plating. The effects of parameters such as flow density, electroplating bath temperature and carbon concentration in the water bath were studied on the morphology and roughness of the surfaces of these coatings. Light microscope and electron microscope (SEM) were used to study the morphology of the coatings. These composite coatings are dense and the nickel grains are round and round. Increasing the concentration of carbon in the bath from / 5 g l i t to 30 g l i t leads to a decrease in surface roughness. Increasing the concentration of carbon in the bath increases the surface roughness. This phenomenon can be attributed to the massification of carbon particles in the coating.
INTRODUCTION
Electroplating of composite coating is a method by which non-metallic fine particles can be introduced into the metal or alloy field in order to improve the surface properties of the sediment. Composite coatings including a metallic background with fine particles (mainly oxides or carbides) have been developed in recent years and have created unique coatings. Most of the work done in this area is to produce hard, corrosion resistant coatings. , Wear resistant and self-lubrication systems. Such coatings cover a wide range of applications such as machine components, machinery, automobile and aircraft industries. Coating simultaneously non-metallic particles and metal phases improves several physical and mechanical properties of the coating. Nickel, copper and chromium are mainly used as ground metal. Ceramic particles used include Wc, MoS2, TiO2, Cr2O3, SiC, Al2O3, etc. Polymer particles such as PTFE and PE have been used to reduce the friction coefficient of the composite surface. Ceramic particles such as SiC have been used to create abrasion resistance and MoS2 and PTFE particles for lubrication. Due to the extensive use of Ni as a protective coating, Ni composite coatings have been discussed a lot. Large particles such as TiO2, Al2O3, SiO2 and SiC particles are introduced into nickel coatings that improve their hardness and abrasion resistance.
Year: 2017
Publisher : 11th National Congress of metallurgy of Iran
By : Mahnaz Kiani, Mohammad Ibrahim Baharulum
File Information: persian Language/ 10 Page / size: 399 KB
سال : 1396
ناشر : يازدهمين كنگره ملي مهندسين متالورژی ايران
کاری از : مهناز كياني ،محمد ابراهيم بحرالعلوم
اطلاعات فایل : زبان فارسی / 10 صفحه / حجم : KB 399
نقد و بررسیها
هنوز بررسیای ثبت نشده است.