توضیحات
چکیده
رفتار ترمومكانيكال فولاد آلياژي AISI 4340به كمك دستگاه ديلاتـومتر 805A/Dدرشـرايط دمـايي 900 – 1100 °Cو نـرخ كـرنش 0.01 -1 S-1بر اساس منحني هاي تنش – كرنش حقيقي بدست آمده مورد بررسي قرار گرفت . با ارزيابي ريز ساختار نمونه هاي تغييـر فـرم يافتـه صحت وقوع تبلور مجدد ديناميكي در شرايطي كه نمودار رفتار بازيابي دينـاميكي را از خـود نـشان مـي دهـد مـشخص گرديـد.در ادامـه بـر اسـاس مشاهدات متالوگرافي مشخص شد كه در شرايطي كه دماي تغيير فرم بـالا تـر از 1000 °Cمـي باشـد توزيـع دانـه هـا صـرف نظـر از انـدازه از يـك يكنواختي مناسب برخوردار مي باشند. همچنين بر اساس بررسي هاي ريز ساختاري انجام شده بر روي نمونه ها مشخص گرديد كه با كـاهش دمـا و افزايش نرخ كرنش (افزايش Z) فرآيند تبلور مجدد ديناميكي به صورت جزئي انجام مي شود.
مقدمه
امروزه يكي از روشهاي توليد محصولات فلزي در مقاطع و اشكال مختلـف ماننـد ورق، ميلگـرد و انـواع شافت ها به صورت نورد و فورج در جهت كاهش انرژي مـصرفي و بـالا بـردن رانـدمان بـه منظـور افـزايش خواص مكانيكي و فيزيكي ، عمليات ترمومكانيكال است . عمليات ترمومكانيكال عبارت است از كنترل عمليات حرارتي، تغيير فرم پلاستيكي و تحولات ريزساختاري در قالب يك سـيكل كـاري ، لـذا در ايـن عمليات در اثر انجام كار مكانيكي(تغييرفرم) و عمليات حرارتي به طور هم زمان در يك سيكل در زمـان و انرژي صرفه جويي ميشود. در طي تغيير فرم گرم در ايـن عمليـات يـك نـوع ارتبـاط زنجيـره اي بـين پديده هاي متالورژيكي كارسختي ،بازيابي ديناميكي وتبلور مجدد ديناميكي در دانه هـاي آسـتنيت اوليـه رخ ميدهد. در رنج دمايي 0/1-0/5 Tmافزايش پيوسته تنش در حين اعمـال كـرنش باعـث افـزايش دانسيته نابجائي هاو انجام فرآيند كار سختي مي شـود . درطـي فرآينـد كارسـختي نابجـائي هـا در هنگـام حركت به يك سري از موانع از قبيل نابجائي هاي ديگر، مرزدانـه هـا ، اتم هـاي حـل شـونده و ذرات فـاز ثانويه برخورد ميكنند، كه اين امر باعث افزايش دانسيته نابجائي ها و در نتيجه افزايش انرژي داخلي فلـز مي شود. از طرفي فرآيند هاي ترميم ديناميكي بازيابي وتبلور مجدد باعث كاهش دانسيته نابجائي ها و در نتيجه كاهش انرژي داخلي فلز مي شوند.
ABSTRACT
Thermomechanical behavior of AISI 4340 alloy steel was studied using a 805A / D dilatometer device under temperature conditions of 900-1100 ° C and strain rate of 0.01-1 S-1 based on the stress-strain curves of the obtained strain. By evaluating the microstructure of the modified samples, the accuracy of the dynamic recrystallization was determined in the conditions where the dynamic recovery behavior diagram is shown. In the following, according to the metallographic observations, it was found that under conditions where the temperature change of form above 1000 ° C, the distribution of seeds, regardless of the size of a suitable uniformity. Also, based on the microstructural analysis performed on the samples, it was determined that with decreasing temperature and increasing the strain rate (Z), the dynamic re-crystallization process is done in detail.
INTRODUCTION
Today, thermo mechanical operations are one of the methods of producing metal products in different sections and shapes such as sheets, rods and all types of shafts in rolling and forging to reduce energy consumption and increase efficiency in order to increase mechanical and physical properties. Thermomechanical operations consist of controlling thermal operation, changing plastic shape and microstructure changes in the form of a working cycle, therefore, in this operation, due to mechanical work (changeover) and thermal operation simultaneously in a cycle, time is saved and energy is saved. . During the change of the hot form in this operation, a chain of relationships occurs between the metallurgical, technological, dynamic and dynamic re-crystallization of primary austenitic grains. In the temperature range of 1.0-0.5 Tm, continuous stress increase during strain increases the permeability and hardness process. During the process of labor, disadvantages encounter a series of obstacles such as other disruptions, margins, soluble atoms, and secondary phase particles, which increases the density of dislocations and, as a result, increases the internal energy of the metal. . On the other hand, the processes of dynamic retrieval and recrystallization repair reduce the density of dislocations and, as a result, reduce the internal energy of the metal.
Year: 2007
Publisher : 11th National Congress of metallurgy of Iran
By : Seyyed Rohollah Rouhani, Javad Rajabi, Mohammad Reza Mashchian, Ahmad Maneshi
File Information: persian Language/ 13 Page / size: 2.22 KB
سال : 1386
ناشر : يازدهمين كنگره ملي مهندسين متالورژی ايران
کاری از : سيد روح اله رواني ، جواد رجبي ،محمد رضا مسچيان ،احمد منشي
اطلاعات فایل : زبان فارسی / 13 صفحه / حجم : KB 2.22
نقد و بررسیها
هنوز بررسیای ثبت نشده است.