توضیحات
چکیده
در این پژوهش اثر نسبت سطح به حجم بوته بر نوع محصولات حاصل از واکنش TiO2و Alدر حضور KClO4مورد بررسي قرار گرفت. مطابق با نتايج بدست آمده با کاهش نسبت مزبور نوع محـصولات از پودر نانوکامپوزيتي آلوميناید تيتانيوم آلومينا به بدنـه کـامپوزيتي غیرپـودري تبـديل مـي گـردد. مطـابق بـا بررسي میکروسکوپي، پودر نانوکامپوزيتي تولیدی شامل ذراتي با ابعاد 30نانومتر مي باشد.
مقدمه
کامپوزيت هاي زمينه بین فلزي گونه جديدي از کامپوزيت هـا بـا خواصـي جـذاب مـي باشـند. کامپوزيت هـاي آلومينايد /تيتانيم آلومينا از جذابيت فزاينده اي براي استفاده در کاربردهاي دما بالا برخوردارند.یکی از ويژگی های ممتاز اين کامپوزيت، روش توليد آن مي باشد. کامپوزيت مزبور را مي تـوان بـا اسـتفاده از مواد اوليه ارزان قيمت TiO2و Alمطابق با واکنش زير توليد کرد: 3TiO2+7Al=3TiAl+2Al2O3 روش هاي متفاوتي براي انجام واكنش بررسي شده اسـت. كلاسـون و همكـارانش مـذاب Alرا بداخل بلوك پيش ساخته اي از TiO2نفوذ دادند. ژانگ و همكارانش مخلوط TiO2/Alرا تحـت آسياكاري مكانيكي قرار داده و سپس پودر آسياكاري شـده را تحـت گرمـايش قـرار دادنـد. كلاسـون و همكارانش مخلوط TiO2/Alرا تحت پرس گرم قرار دارنـد. وجـه مـشترك تمـام فرآينـدهاي فوق، توليد درجاي يك بدنه كامپوزيتي بصورت مستقيم از مواد اوليه TiO2/Alمي باشد. ايجاد تخلخل در بدنه توليد شده در حين واكنش مزبور يكي از مشكلات عمومي دخيل در فرآيند مزبور مي باشـد. يكي از روشهاي غلبه بر محدوديت فوق، توليد پودر كامپوزيتي آلومينايد تيتـانيم/آلومينـا قبـل از فرآينـد چگالش مي باشد. از سوي ديگـر توليـد يـك بدنـه نانوسـاختار از جملـه روشـهاي مـوثر ارتقـاء خـواص مي باشد. بدين منظور لازم است كه در ابتدا پـودر نانوكـامپوزيتي توليـد گـردد. در ايـن پـژوهش روشـي جهت توليد پودر نانوكامپوزيتي آلومينايد تيتانيم/آلومينا معرفي مي شود. سپس اثر نسبت سـطح بـه حجـم بوته در نوع محصولات بدست آمده مورد بررسي قرار مي گيرد. در ايــن تحقيــق از پودرهــاي دي اكــسيد تيتــانيم( 100µm ٪و<99/95 ) آلومينيــوم(٪ 99/98<150µm ) و پركلرات پتاسيم (٪ 99/99<150µm)به عنوان مواد اوليـه اسـتفاده شـد. مـواد اوليـه بـر اساس واكنش زير جهت شارژ در بوته هاي آلومينايي به حجم 330 ، 195 ،43و 592ميلي ليتر توزين شدند.
ABSTRACT
In this study, the effect of surface to volume ratio on the type of products obtained from the reaction of TiO2 and Al in the presence of KClO4 was investigated. According to the results, by reducing the ratio of these products, the type of products from aluminum-titanium alumina nanocomposite powder to the non-impure composite body will be converted. According to a microscopic examination, nanocomposite powder produced contains particles of 30 nm in size.
INTRODUCTION
Intermediate metal composites are a new species of composites with attractive properties. Alumina / titanium alumina composites have a growing appeal for use in high temperature applications. One of the distinguishing features of this composite is its production method. The composite can be produced using the cheap raw TiO2 and Al materials according to the following reaction: 3TiO2 + 7Al = 3TiAl + 2Al2O3 Different methods for the reaction are investigated. Claseon and his colleagues infiltrated Al melt into a prefabricated block of TiO2. Zhang and his co-workers put TiO2 / Al in a mechanical asymmetric mixture and then heated the asynthetic powder. Claseon and his colleagues are subjected to hot compression of TiO2 / Al. The common feature of all of the above processes is the production of a composite body directly from the TiO2 / Al material. Creating porosity in the body produced during the reaction is one of the general problems involved in the process. One of the ways to overcome this limitation is the production of titanium / alumina alumina composite powder before the condensation process. On the other hand, the production of a nanostructured body is one of the most effective methods for promoting properties. For this purpose, it is necessary to first create a nanocomposite powder. In this research, a method for producing titanium / alumina aluminide nanocomposite powder is introduced. Then, the effect of surface to plant size on the type of products obtained is investigated. In this research, titanium dioxide (100μm% and 99.95%) aluminum (99.98% <150μm) and potassium perchlorate (99/99% <150μm) were used as raw materials. The raw materials were weighed to 330, 195, 43 and 592 milliliters based on the charge response in alumina plants.
Year: 2007
Publisher : 11th National Congress of metallurgy of Iran
By : Marzieh Moradi, Bashir Heidarian, Mahmood Nili Ahmad Abadi and Mohammad Habibi Parsa
File Information: persian Language/ 10 Page / size: 366 KB
سال : 1386
ناشر : يازدهمين كنگره ملي مهندسين متالورژی ايران
کاری از : عليرضا كمالي ,جواد محمودبابويي , سيدمحمدمهدي هادوي , حکمت رضوي زاده
اطلاعات فایل : زبان فارسی / 10 صفحه / حجم : KB 366
نقد و بررسیها
هنوز بررسیای ثبت نشده است.