توضیحات
چکیده
طراحي و توسعه پايدار واحدهاي احياي مستقيم در گرو برتري هاي فني- اقتصادي، عرضه و تقاضاي مواد اوليه مصرفي، کيفيت آهن اسفنجي تولیدی و مسائل زيست محيطي است. براي نشان دادن اثر اين متغييرها، اطلاعات يک دوره کار واحدهاي زم- زم، ميدرکس و قائم در ايران براي توليد آهن اسفنجي مقايسه شده اند. ويژگي کوره احيا براي توليد آهن اسفنجي در واحدهاي زم- زم، ميدرکس و قائم تا حدودي، يکسان اما وجه تمايز عمده فن در اوري توليد گاز احيا کننده از گاز طبيعي است. در روش زم- زم و ميدرکس، گاز طبيعي و گاز خروجي کوره احيا در مجاورت کاتاليزور، در صورتي که در واحد قائم گاز طبيعي و مخلوط گاز خروجي کوره احيا و اکسيژن بدون استفاده از کاتاليزور اما در دمايي نسبتاً بيشتر از واحد زم – زم و ميدرکس، مبادله مي گردد. اين تغيير فناوري موجب تغيير سرمايه گذاري براي واحد، مصرف گاز طبيعي و ويژگي آهن اسفنجي توليدي مي گردد. با لحاظ نمودن امکانات سرمايه گذاري، نرخ مصرف گاز و کيفيت آهن اسفنجی ، مزيت واحدها نسبت به يکديگرمشخص مي گردد.
مقدمه
براي توليد محصولاتي ويژه، مواد اوليه متنوع، شيوه هاي توليد متعدد، فرايندها، فناوري ها و شرايط کارکرد واحدها خاص وسرمايه گذاري ها فرق دارند. بديهي است عامل تعيين کننده در انتخاب فرايندها، روش ها، امکانات تامين مواد اوليه، امکانات سرمايه گذاري، اقتصاد توليد، نرخ توليد،کيفيت و کارآيي محصولات توليدي و آلاينده هاي محيط زيست واحدها است. هدف از تدوين اين مقاله، از بين عوامل متعدد و متنوع و موثر برشرايط کمي، کيفي و اقتصادي در انتخاب واحدها، نشان دادن اثر فن آوري در ميزان انرژي مصرفي و نرخ و کيفيت مواد توليدي است، هرگاه مواد اوليه وشرايط عمومي توليد محصول، يکسان فرض گردد. به اين منظور، به عنوان نمونه، اثر شيوه توليد آهن اسفنجي بر نرخ و کيفيت توليد آهن اسفنجي در واحد هاي زم- زم ( Zam- Zam)ميدرکس) (Midrex Module 1, 2, 3) در مجتمع فولاد اهواز و قائم (Ghaem) در کارخانه ذوب آهن اصفهان، بررسي شده است.
ABSTRACT
The design and development of sustainable direct conversion units depends on the technical and economic advantages, the supply and demand of raw materials, the quality of production of sponge iron and environmental issues. In order to illustrate the effect of these variables, the information of a period of winter, Mordrec and Qa’im units in Iran has been compared to produce sponge iron. The characteristics of the furnace for the production of sponge iron in winter units, Mordrec and Ghaem are somewhat the same, but the main distinction of the fan is the production of natural gas recovery gas. In the Winter and Mordex methods, natural gas and exhaust gas from the revolving furnace adjacent to the catalyst, provided that in a vertical unit of natural gas and a mixture of exhaust gas, the furnace is recovered and oxygen is used without catalyst, but at a relatively high temperature Mordrex, is exchanged. This change in technology will change the investment for the unit, the consumption of natural gas and the characteristics of the sponge iron produced. Considering investment opportunities, gas consumption rate and quality of sponge iron, the advantages of units are compared to each other.
INTRODUCTION
Different raw materials, multiple production processes, processes, technologies and operating conditions of specific units and investments differ in the production of special products. Obviously, the determinant factor is the selection of processes, methods, materials supply facilities, investment opportunities, production economics, production rates, quality and efficiency of production and environmental pollutants of units. The purpose of this paper is to identify the effect of technology on the amount of energy consumed and the rate and quality of the materials produced from the various factors affecting the quantitative, qualitative and economical conditions in the selection of units, if the raw materials and the general conditions of production of the product are the same Suppose For this purpose, for example, the effect of sponge iron production on the rate and quality of sponge iron production in Zam-Zam (Midrex) (Midrex Module 1, 2, 3) in Ahvaz and Ghaem Steel Complex ) At Isfahan Iron and Steel Works.
Year: 2007
Publisher : 11th National Congress of metallurgy of Iran
By : Nasser Tohidi – Arman Rabie Far
File Information: persian Language/ 12 Page / size: 133 KB
سال : 1386
ناشر : يازدهمين كنگره ملي مهندسين متالورژی ايران
کاری از : ناصر توحيدي -آرمان ربيعي فر
اطلاعات فایل : زبان فارسی / 12 صفحه / حجم : KB 133
نقد و بررسیها
هنوز بررسیای ثبت نشده است.