توضیحات
چکیده
اولین نسل هواپیماها با موتورهای بنزینی در جنگ جهانی اول مورد استفاده قرار گرفت. این موتورها در آن زمان انقلاب بزرگی در نوع خود بودند، ولی به دلیل بیشتر بودن معایب نسبت به مزایای آنها رفته رفته از بکارگیری موتو رهای پیستونی بنزینی در تمامی هواپیماها که بعدها ساخته شده اند کاسته گردید. سپس موتورهایی با دارا بودن پره های توربینی که بنام موتورهای جت معروف شدند جایگزینی بسیار مناسبی به دلایل مختلفی از جمله سادگی ساختار آن بازدهی بیشتر و.. بوده اند. در قسمت ورودی هوا به موتور جت تعدادی پره های مکنده وجود دارد که باعث کمپرس هوا به قسمت میانی موتور می شود در آنجا با اختلاط با سوخت ایجا جرقه توسط سیستم جرقه زنی به صورت جریان هوای گرم به سمت قسم پره های توربین حرکت خواهد کرد باعث به چرخش درآمدن آنها خواهد شد که این چرخه از ورود به خروج به این منوال خواهد بود.
مقدمه
توربین نقش بسزایی در صنعت، صنایع نظامی ، نیر.وگاه و … دارد از جمله توربین ها می توان به توربین های گازی اشاره نمود. اساس عملکرد توربین گازی شبیه به نیروگاه های بخار است با این تفاوت که به جای آب از هوا استفاده می شود. هوای تازه ی جو وارد کمپرسور می شود و فشار آن افزایش می یابد و با پاشش سوخت به قسمت هوا متراکم و اختلاط با آن و ایجاد جرقه توسط سیستم جرقه زنی جریانی با دمای بسیار بالا تولید شده (فرآیند افزایش گرما) سپس این گاز با دمای زیاد با توسط نیرویی که به آن وارد شده وارد قسمت توربین می شود. در آن جا ضمن به حرکت در آوردن محور توربین و ایجاد کار ,فشار خروجی و انبساطی در قسمت خروجی می تواند با مولدهایی همچون الکترو موتور به صورت محوری کوبل شوند و انرژی آن صرف تولید کار در محور مولد می شود.
ABSTRACT
The first generation of airplanes with gasoline engines was used during the First World War. At the time, these engines were a major revolution, but due to the greater disadvantages of their benefits, they gradually diminished the use of petrol piston motors for all aircraft that were later built. Subsequently, engines with turbine blades known as jet engines were a very good replacement for a variety of reasons, including its simplicity of structure, higher yields, and more. In the air inlet to the jet engine, there are a number of sucker blades that give the air compressor to the middle of the engine, whereby the spark ignition is mixed up with a hot air stream to the turbine blade. It will turn their turn around that this cycle will be from entering the exit to this location.
INTRODUCTION
Turbines have a significant role in the industry, military industry, civil engineering, etc., including turbines can be referred to gas turbines. The basis for the operation of the gas turbine is similar to that of steam plants, except that it is used instead of water from the air. The fresh air of the atmosphere enters the compressor and its pressure increases, and by compressing air into the air and mixing it with it and creating a spark generated by a high-temperature current-ignition system (the process of increasing heat), then the gas with the temperature Too much enters the turbine with the force it enters. In addition, while moving the turbine axis and creating the work, the output and expansion pressure on the outlet can be pivoted with electromotor generators, and its energy is used to generate labor in the generator axis.
Year: ۲۰۱۸
Publisher : Regional Conference on New Technologies in Mechanical and Electronic Installations in Buildings
By : Seyyed Davood Khademi
File Information: English Language/ 13 Page / size: 742 KB
سال : ۱۳۹۶
ناشر : همایش منطقه ای فن آوری های نوین در سیستم های تاسیسات مکانیکی و الکترونیکی در ساختمان ها
کاری از : سید داوود خادمی
اطلاعات فایل : زبان فارسی / 13 صفحه / حجم : KB 742
نقد و بررسیها
هنوز بررسیای ثبت نشده است.