A UPFC MODEL FOR DYNAMIC STABILITY ENHANCEMENT[taliem.ir]

A UPFC MODEL FOR DYNAMIC STABILITY ENHANCEMENT

ABSTRACT

While the controllability of the line power flow by unified power flow controller (UPFC) has been recognised, only very limited information is available concerning the quantitative control of the UPFC to provide additional damping during system oscillations. This paper presents a current injection model of UPFC which is suitable for use in power system stability studies. To use the current injection model on dynamic stability studies, a proper control method is necessary. It is proposed that the shunt compensation of UPFC is controlled to maintain the system bus voltage and the two components of UPFC series voltage, which are in phase and quadrature with the line current, are controlled in coordination by Strip Eigenvalue Assignment method. The eigenvalue analysis and time domain simulation results show that the proposed model and control method can substantially improve the dynamic stability of the power system.

INTRODUCTION

Flexible AC Transmission System (FACTS) offers an alternative solution to transmission expansion by increasing the utilization of the existing facilities towards their thermal limits. A unified power flow controller (UPFC) is a type of FACTS controller. It is capable of both supplying to and absorbing from the power system through the excitation converter and transformer a controllable amount of reactive power and inserting a voltage of controllable magnitude and phase angle in series with the transmission system through the booster converter and transformer . While the controllability of the line power flow by UPFC has been recognized, only very limited information is available concerning the quantitative control of the UPFC to provide additional damping during system oscillations. There is the need to further investigate the interaction of the UPFC with the rest of the electrical network. The first part of the investigation is to establish a suitable UPFC dynamic model. This paper proposes a UPFC current injection model which is obtained from some modification of UPFC power injection model in . The proposed model can easily be incorporated in the Power System Toolbox , which is a powerful dynamic simulation program. After establishing the UPFC current  injection model, a proper control method is necessary for the model to improve the dynamic stability of the power system. In the improvement of transient stability using UPFC was investigated and a UPFC model and its control method were proposed. But the control method requires detailed information of the whole power system.

چکیده

در حالیکه کنترل قابلیت جریان خط توسط جریان کنترل کننده جریان یکپارچه (UPFC) به رسمیت شناخته شده است، تنها اطلاعات بسیار محدودی در مورد کنترل کمی UPFC وجود دارد که باعث ایجاد تغییرات اضافی در نوسانات سیستم می شود. این مقاله یک مدل تزریق جریان UPFC است که برای استفاده در مطالعات پایداری سیستم قدرت مناسب است. برای استفاده از مدل تزریق جاری در مطالعات پایداری دینامیک، یک روش کنترل مناسب لازم است. پیشنهاد شده است که تعویض شانت UPFC برای حفظ ولتاژ بایاس سیستم و دو جزء ولتاژ سری UPFC که در فاز و quadrature با جریان خط هستند کنترل می شود، در هماهنگی با روش تعیین اعداد صحیح نوار کنترل می شود. نتایج حاصل از تجزیه و تحلیل واقعی و زمان شبیه سازی دامنه زمانی نشان می دهد که مدل پیشنهادی و روش کنترل می توانند به طور قابل توجهی ثبات پویا سیستم قدرت را بهبود بخشد.

مقدمه

سیستم انتقال نیروی انعطاف پذیر (FACTS) یک راه حل جایگزین برای گسترش انتقال را با افزایش استفاده از امکانات موجود به سمت محدودیت های حرارتی خود ارائه می دهد. یک کنترل جریان قدرت یکپارچه (UPFC) یک نوع کنترل کننده FACTS است. این توانایی هر دو را از طریق مبدل حرارتی تحریک کننده و ترانسفورماتور از یک سیستم کنترل و تحریک توان راکتیو فراهم می کند و ولتاژ مقادیر قابل کنترل و زاویه فاز را به صورت سری با سیستم انتقال از طریق مبدل تقویت کننده و ترانسفورماتور وارد می کند. در حالی که کنترل کننده جریان جریان خط توسط UPFC شناخته شده است، تنها اطلاعات بسیار محدودی در مورد کنترل کمی UPFC برای ارائه مهار اضافی در طول نوسانات سیستم در دسترس است. نیاز به بررسی بیشتر تعامل UPFC با بقیه شبکه برق است. بخش اول تحقیق، ایجاد یک مدل پویا UPFC مناسب است. این مقاله یک مدل تزریق فعلی UPFC را پیشنهاد می کند که از برخی تغییرات مدل تزریق قدرت UPFC در مدل ارائه شده است. مدل پیشنهادی به راحتی می تواند در جعبه ابزار قدرت سیستم، که یک برنامه شبیه سازی پویا قدرتمند است، گنجانده شود. پس از ایجاد مدل تزریق جریان UPFC، یک روش کنترل مناسب برای مدل برای بهبود پایداری دینامیکی سیستم قدرت لازم است. در بهبود پايداری گذرا با استفاده از UPFC، مدل UPFC و روش کنترل آن پيشنهاد شده است. اما روش کنترل نیاز به اطلاعات دقیق کل سیستم قدرت دارد.

Year: 2016

Publisher : IEEE

By : Zhaojun Meng and P.L. So

File Information: English Language/ 5 Page / size: 86.76 KB

Download

سال : 1395

ناشر : IEEE

کاری از : ژائوون منگ و پ. ل. بنابراین

اطلاعات فایل : زبان انگلیسی / 5 صفحه / حجم : KB 86.76

لینک دانلود

0 پاسخ

دیدگاه خود را ثبت کنید

تمایل دارید در گفتگو شرکت کنید؟
نظری بدهید!

دیدگاهتان را بنویسید