توضیحات
چکیده
در اين تحقيق مورفولوژي وزبري سطح پوشش هاي چند لايه روي /نيكل ونيكل /روي با ضخامت كل 8 ميكرومتر مورد مطالعه قرار گرفت . پوشش هاي چند لايه روي نيكل با ضخامت كل 8ميكرومترتوسط تكنيك آبكاري الكتريكي دو حمامي ايجاد گرديدند .در ادامه بمنظور بررسي مورفولوژي ،سطح نمونه ها توسط ميكروسكوپ الكتروني روبشي مورد بررسي قرار گرفت .همچنين زبري سطح نمونه ها توسط دستگاه زبر سنجي سطح مورد بررسي قرار گرفت .نتايج حاصل از بررسي مورفولوژي پوشش ها نشان مي دهد كه افزايش تعداد لايه ها در ضخامت كل يكسان باعث كاهش اندازه دانه در پوشش هاي چند لايه نيكل/روي ميگردد. همچنين در مورد پوشش هاي روي/ نيكل بجز در مورد پوشش تك لايه نيكل، باكاهش ضخامت زير لايه روي اندازه دانه پوشش كاهش مي يابد .در هر دومورد كاهش اندازه دانه پوشش سبب ايجاد يك پوشش متراكم وبا كيفيت سطحي بهتر مي گردد.نتايج حاصل از آزمون زبري سطح اين موضوع را تاييد مي كند.
مقدمه
پوشش دهي چند لايه آلياژي يكي از تكنيكهاي مهندسي سطح براي ايجاد لايه هاي نازك سطحي با ساختار كنترل شده، به منظور ايجاد خواص سطحي مطلوب مي باشد.همانطور كه از نام اين تكنيك بر مي آيد ، پوشش هاي چند لايه در اصل پوشش هاي غير همگن بوده و در برگيرنده لايه هاي مختلف فلزي و يا آلياژي مي باشند. در اين نوع پوشش، هر لايه نقش منحصر به فردي را در خواص نهايي سيستم ايفا مي نمايد. اين پوشش ها از خواص منحصر به فردي از جمله مقاومت به خوردگي خوب، استحكام مكانيكي بالا و مقاومت مغناطيسي مناسب برخوردار بوده و به همين دليل مورد توجه محققان قرار گرفته اند. با توجه به خواص مذكور، اين پوشش ها طي دهه گذشته در موارد مختلفي بمنظور افزايش مقاومت به خوردگي و موارد ديگر مورد استفاده قرار گرفته اند. در طي چند سال گذشته تحقيقات زيادي در مورد پوشش هاي چند لايه روي انجام گرفته است .پوشش هاي چند لايه روي از خواص مقاومت به خوردگي مناسبتري نسبت به پوشش هاي تك لايه برخوردار مي باشند.
ABSTRACT
In this research, the morphology of Zarif’s surface of zinc / nickel / nickel / zinc coatings with a total thickness of 8 micrometers was studied. Multi-layer coatings of nickel with a total thickness of 8 micrometers were created by two-electrothermal electroplating technique. In order to investigate morphology, the surface of the specimens was examined by scanning electron microscopy. Also, the surface roughness of the samples was examined by a surface roughness device The results of the investigation of the morphology of the coatings show that increasing the number of layers in the same total thickness reduces the grain size in the Ni / Zn coatings. Also, for zinc / nickel coatings, except for single-layer nickel coating, reducing the thickness of the substrate will decrease on the grain size of the coating. In each case, reducing the size of the coating grain will result in a dense coating with a better surface quality. The results obtained from The rough test confirms the level of this issue.
INTRODUCTION
Multi-layer alloy coating is one of the surface engineering techniques for creating thin-layer surfaces with a controlled structure to create optimal surface properties. As the name suggests, multilayer coatings are inherently non-homogeneous coatings And consists of various metal layers or alloys. In this type of coating, each layer plays a unique role in the final properties of the system. These coatings have unique properties such as good corrosion resistance, high mechanical strength and suitable magnetic strength and are therefore considered by researchers. According to these properties, these coatings have been used in several cases to increase corrosion resistance and other items during the past decade. Over the past few years, many studies have been conducted on multi-layer coatings on zinc. Multi-layer coatings of zinc have better corrosion resistance properties than single-layer coatings.
Year: 2007
Publisher : 11th National Congress of metallurgy of Iran
By : Mansour Razpar, Mohammad Ibrahim Bahr al-ulum
File Information: persian Language/ 8 Page / size: 556 KB
سال : 1386
ناشر : يازدهمين كنگره ملي مهندسين متالورژی ايران
کاری از : منصور رهسپار ,محمد ابراهيم بحرالعلوم
اطلاعات فایل : زبان فارسی / 8صفحه / حجم : KB 556
نقد و بررسیها
هنوز بررسیای ثبت نشده است.