توضیحات
خلاصه
قابهاي خمشي مركب RCSنوع جديدي از قابهاي خمشي هستند كه در آنها از تركيب ستونهاي بتني و تيرهاي فولادي استفاده ميشود. تمركز اصلي در طراحي قابهاي ،RCSروي اتصال بين تير فولادي و ستون بتني (اتصال RCS) ميباشد كه تحقيقات انجام يافته در مورد اين سازه ها بيشتر بر روي اتصالات مركب آنهابوده كه منجر به تدوين آيين نامه هايي براي طراحي اين اتصالات شده است. در اين مقاله، نحوه مدلسازي قابهاي RCSبه خصوص اتصالات آن كه تير فولادي به طور ممتد از درون ستون بتني عبور ميكند، تشريح ميشود.همچنين، مقايسه رفتار اين قابها با قابهاي بتني و تاثير تير فولادي روي رفتار اين قابها مورد بررسي قرار گرفته است.
مقدمه
سازههاي مركب (مختلط) شامل اعضاي بتن مسلح و فولادي، در سالهاي گذشته رواج بسياري پيدا كرده اند. اين سيستمها در ساخت ساختمان هاي چند طبقه كارآرايي زيادي دارند. اين سازه ها اعضاي بتني و فولادي را مورد استفاده قرار ميدهند، به طوري كه از خصوصيات هر مصالح در تحمل بارهاي وارده، به صورت بهينه استفاده ميشود. در اين تحقيق، مدل جديدي از قاب خمشي مركب به نام قاب RCSمعرفي ميشود. در اين علامت اختصاري RCبه مفهوم بتن مسلح و Sنيز به مفهوم فولاد ميباشد واين قابها، قابهاي تركيبي با ستونهاي بتني و تيرهاي فولادي هستند. ستونهاي بتني تقويت شده (بتن آرمه) و تيرهاي فولادي بهصورت مركب در اين سازه ها استفاده ميشوند، به گونه اي كه مزاياي مصالح استفاده شده، با توجه به خصوصيات بتن و فولاد به فرم كاملاً مؤثري در سيستم هاي سازه اي دخالت ميكنند. يعني از مقاومت فشاري بتن در ستون و از مقاومت كششي فولاد در تير به نحوي استفاده شده است كه اين استفاده مناسب باعث كم شدن سطح مقطع اعضاء سازه ميگردد. استفاده بهينه از مصالح باعث پايين آمدن وزن ساختمان و كاهش هزينه هاي ساخت نيز ميگردد. با پايين آمدن وزن سازه، نيروي وارد بر پي كاسته شده و در نتيجه سطح مقطع و ضخامت كمتري براي فونداسيون حاصل ميگردد كه از اين جهت نيز باعث كاهش هزينه ساخت كل سازه ميگردد. با توجه به مقاومت فشاري بالاي بتن نسبت به مقاومت كششي آن، استفاده از بتن در ستون بهترين رفتار بتن را نتيجه ميدهد. همچنين با توجه به مقاومت كششي بالاي فولاد، استفاده از فولاد به عنوان عضو خمشي مناسب ترين رفتار فولاد را نتيجه ميدهد. دراتصالات تركيبي ،RCSبه علت سراسري بودن تيرهاي فلزي، جوشكاري تير به ستون به حداقل رسيده و به اين وسيله از ايجاد نقطه ضعف در سازه جلوگيري ميشود.
ABSTRACT
The RCS composite bending frames are a new type of flexural frames that combine concrete columns and steel beams. The main focus is on the design of RCS frames, on the connection between the steel gun and the concrete column (RCS connection), which has done research on these structures more on their composite joints, which resulted in the formulation of regulations for the design of these joints. In this paper, the modeling of RCS frames, especially joints, is described in which steel beams pass continuously through the concrete column. Also, the comparison of the behavior of these frames with concrete frames and the effect of steel beams on the behavior of these frames has been investigated.
INTRODUCTION
Composite structures (including complexes) involving reinforced concrete and steel have been widely used in recent years. These systems are highly effective in building multi-storey buildings. These structures use concrete and steel members, so that the properties of each material are used to withstand loads in an optimal manner. In this research, a new model of composite bending frame called the RCS frame is introduced. In this abbreviation RC is the concept of reinforced concrete, and S is also the concept of steel, and the frames are frames combined with concrete pillars and steel beams. Reinforced concrete columns (reinforced concrete) and steel beams are combined in these structures, so that the advantages of the materials used in the concrete structure and in the form of a completely effective form in the structural systems interfere with the properties of concrete and steel. This means that the compressive strength of the concrete in the column and the tensile strength of the steel in the beam are used in such a way that this proper use reduces the cross section of the structural members. Optimum use of materials will reduce the weight of the building and reduce the cost of construction. By lowering the weight of the structure, the force applied is reduced, resulting in less cross-sectional and lower thickness of the foundation, which, in turn, reduces the cost of construction of the entire structure. Due to the high compressive strength of concrete relative to its tensile strength, the use of concrete in the column results in the best concrete behavior. Also, due to the high tensile strength of steel, the use of steel as a bending member results in the most suitable steel behavior. Combined joints, RCS Due to the presence of metal beams worldwide, the welding of the beam to the column has been minimized and this will prevent the creation of a weak point in the structure.
Year: 2011
Publisher : Sixth National Congress on Civil Engineering
By : Nima Talebian , Bahman Farahmandazar , Hossein Ghaffarzadeh
File Information: English Language/ 8 Page / size: 472 KB
Only site members can download free of charge after registering and adding to the cart
سال : 1390
ناشر : ششمین کنـگره ملی مهنـدسی عمـران
کاری از : نيما طالبيان ، بهمن فرهمندآذر ، حسين غفارزاده
اطلاعات فایل : زبان فارسی / 8 صفحه / حجم : KB 472
نقد و بررسیها
هنوز بررسیای ثبت نشده است.