توضیحات
چکیده
در اين مقاله، روش جديدي براي افزايش نرخ چرخش (Slew Rate) تقويت كننده هاي تمام تفاضلي دو طبقه ارائه شده است. اين روش روي تقويت كننده ي دو طبقه اي پياده سازي شده و نتايج حاصله نشان از دو برابر كردن نرخ چرخش آن دارد. تقويت كننده ي دو طبقه ي طراحي– شده كه با روش پيشنهادي نرخ چرخشش بالا رفته، در يك مدار نمونه بردار كليد-خازني استفاده شده است. اين روش % 10توان تلفي نمونه بردار را افزايش داده در حالي كه حداكثر فركانس كاري آن را از 100MHzتا 100MHzبالا برده است .
مقدمه
زمان قرار (Settling Time) يك تقويت كنندهي عملياتي از مهمترين پارامترهاي آن است. هرچند بدست آوردن تحليلي زمان قرار به دليل رفتار غير خطي آن بسبار مشكل است، اما ميتوان گفت زمان قرار تابعي است از دو پارامتر پهناي باند و نرخ چرخش تقويت كننده . بيشينه ي سرعت تغيير ولتاژ خروجي تقويت كننده در اثر اعمال سيگنال به ورودي تقويت كننده، نرخ چرخش، ناميده ميشود. براي يك بار خازني، ولتاژ پله ي ورودي و تلف توان مشخص، هميشه يك محدوديت فيزيكي براي حداقل زمان قرار در يك فناوري مشخص وجود دارد. محدوديت ذكرشده براي بخشي از زمان قرار صحيح است كه تحت تاثير پاسخ فركانسي تقويت كننده است. اين زمان شامل اواخر استقرار مدار و ورود آن به ناحيه ي خطي و رفتار سيگنال كوچك تقويت كننده ميشود. براي ابتداي پاسخ پله محدوديت ديگري در سرعت استقرار وجود دارد كه مربوط به رفتار سيگنال بزرگ تقويت كننده، شامل نرخ چرخش آن ميشود. اين نرخ فارق از فناوري ساخت تقويت كننده بستگي مستقيم به حداكثر جريان دردسترس تقويت كننده براي شارژ و دشارژ بار
خازني دارد.
ABSTRACT
In this paper, a new method is proposed for increasing the Slew Rate of two-class differential amplifiers. This method is implemented on a two-class reinforcement and the results indicate that it doubles its rotational speed. The two-class design amplifier, which has been upgraded with the proposed rate of rotation rate, is used in a key-capacitor sampling circuit. This method increases 10% of the sampling power while maximizing the operating frequency from 100MHz to 100MHz.
INTRODUCTION
Settling Time is an operational booster of its most important parameters. Although it is difficult to obtain an analysis of the time due to its nonlinear behavior, it can be said that the time is a function of two parameters of the bandwidth and the rotational amplifier rate. The maximum speed of the amplifier output voltage change due to the application of the signal to the amplifier input, is the rotational speed. For a capacitor, the input and output power stack voltage, there is always a physical constraint for the minimum set-up time in a given technology. The limitation is correct for some part of the time, which is influenced by the amplifier frequency response. This time includes the late deployment of the circuit and entering it into the linear region and the behavior of the small signal amplifier. For the beginning of the step response, there is another limit on the rate of deployment, which relates to the amplifier’s large signal behavior, including the rate of its rotation. This rate does not depend on the amplifier manufacturing technology to be directly related to the maximum current available for boosting and discharging
Capacitance.
Year: 2010
Publisher : Eighteenth International Energy Conference of Iran
By : Mohsen Rezaei and Shahin Jafar Abadi Ashtiani
File Information: Persian Language/ 5 Page / size: 570 KB
سال :1389
ناشر : هجدهمین کنفرانس بین المللی برق ایران
کاری از : محسن رضايي و شاهين جعفرآبادي آشتياني
اطلاعات فایل : زبان فارسی / 5 صفحه / حجم : KB 570
نقد و بررسیها
هنوز بررسیای ثبت نشده است.