توضیحات
چکیده
مقاله حاضر به منظور بررسي جوشكاري فولاد زنگ نزن آسـتينتي 310بـه سـوپر آليـاژ اينكونـل 675و تاثير عمليات پيرسازي بر آن آماده گرديده است. به اين منظور از دو فلز پـر كننـده پايـه نيكـل اسـتفاده گرديد: اينكونل 82و اينكونل617 .در اين پژوهش ابتدا رفتار مقايسه اي در جنبه هاي زيـر سـاختار و خواص مكانيكي اين دو فلز در حالت جوشكاري شده و سپس در حالـت جوشـكاري- پيرشـده انجـام شده است. آزمايش ها و بررسي هـا نشـان داد كـه فلـز جـوش اينكونـل 82داراي پايـداري حرارتـي و خواص مكانيكي بالاتري است. بنابراين براي اتصال غير مشابه فوق، استفاده از فلز جوش 82نسـبت بـه فلز جوش اينكو ل ن 617مناسب تر است.
مقدمه
قرارگيري اتصالات جوشكاري تحت شـرايط دمـاي بـالا و خورنـده مـي توانـد بـه راحتـي بـر خـواص مكانيكي و زير ساختار فلز جوش و پايه تاثير بگذارد. رخ دادن واكنش هـاي اسـتحاله اي متعـدد در فلـز جوش و پايه اتصالات مي تواند منجر به تغييرات قابـل توجـه ناخواسـته در مقاومـت مكـانيكي آن شـود بنابراين بكارگيري فلزات جوش پيشنهاد شده در دماي محيط محدود مـي گـردد و لازم اسـت خـواص حاصل شده از قرارگيري فلز جوش و پايه در شـرايط كـاري دمـاي بـالا پـيش بينـي گـردد تـا بتـوان از پايداري حرارتی و خواص مكانيكي آن اطمينان حاصل نمود. انهدام اتصال يرمشابه فـولاد رنـگ نـزن 310به اينكونل 657تحت سرويس، علاوه بر اينكه مي تواند خسارت هاي مالي زيـادي بـر جـاي بگـذارد، مي تواند وجب زيانهاي جاني شود. تشكيل فازهاي ترد در زير ساختار ايـن اتصـال مـي توانـد خـواص مقاومت به ضربه آن را به شدت كاهش دهد و همچنين افت استحكام آن را به همراه داشته باشد كـه در نهايت دامنه انتخاب فلزات پركننده را محدود مي نمايـد. اگـر چـه بـراي اتصـال غيـر مشـابه ذكـر شـده چندين نوع فلـز پركننـده ماننـداينكو لن A،617،82،182،52،152و فـولاد زنـگ نـزن 309و 310قابـل پيشنهاداست ولي رفتار ريزساختاري و پايداري حرارتي ايـن فلـزات جـوش در دمـاي بـالا بـراي زمـان طولاني بايستي به خوبي بررسي گردد تا بتوان مناسـبترين نـوع فلـز جـوش را انتخـاب نمـود.از طرفي براي اتصال غير مشابه فوق نظر مي رسد نوع فلـز جـوش ، خـواص فيزيكـي و خـواص مكـانيكي اتصال به طور كامل بررسي و مطالعه نشده است و مراجع و منابع موجود بسيار محدود است.
ABSTRACT
The present paper was prepared to investigate the welding of 310 stainless steel welding to Supercharger incononl 675 and the effect of pitting operation on it. For this purpose, two nickel base fillers were used: Inconel 82 and Inconel 617. In this study, comparative behavior was performed on the substructure aspects and the mechanical properties of these two metals in the welded state and then in the weld-aged state. Experiments and studies have shown that the ingot metal 82 has a higher thermal stability and mechanical properties. Therefore, for the non-similar connection above, the use of welding metal 82 is more suitable than the incandescent metal 617.
INTRODUCTION
The presence of welding joints under high and corrosive conditions can easily affect the mechanical properties and the structure of the weld metal and the base. The occurrence of several evapotranspiration reactions in the welding metal and the base of the joints can lead to significant unwanted changes in its mechanical strength. Therefore, the application of the proposed welding metals is limited at ambient temperature and it is necessary to obtain the properties of the weld metal and the base In high operating temperatures, a high temperature is predicted to ensure thermal stability and mechanical properties. Unloading the 310 stainless steel connection to the incubator 657 under service, in addition to being able to cause a lot of financial damage, can be a life-threatening product. The formation of crisp phases in the structure of this connection can greatly reduce the properties of its impact resistance and also reduce its strength, which ultimately limits the range of filler metals. Although for the non-identical connection, several types of filler metals such as Linoleum A, 617,82,182,52,152 and stainless steel 309 and 310 are suggested, but the microstructural behavior and thermal stability of these boiling metals at high temperatures for a long time should be well investigated. The type of welding metal, physical properties and mechanical properties of the joint have not been thoroughly investigated, and the references and sources available are very limited, in order to find the most suitable type of welding metal.
Year: 2007
Publisher : 11th National Congress of metallurgy of Iran
By : Hamadan Nefahan, Morteza Shamanian, Fakhredin Ashrafizadeh
File Information: persian Language/ 11 Page / size: 4,97 KB
سال : 1386
ناشر : يازدهمين كنگره ملي مهندسين متالورژی ايران
کاری از : همام نفاخ ،مرتضي شمعانيان ، فخرالدين اشرفي زاده
اطلاعات فایل : زبان فارسی / 11صفحه / حجم : KB 4,97
نقد و بررسیها
هنوز بررسیای ثبت نشده است.