توضیحات
چکیده
تركيب بين فلزي Al3Tiبه علت خواص مكانيكي مناسب، برقراري پيوند شيميايي با آلومينيوم، پايداري حرارتي خوب، ضريب انبساط حرارتي نزديك به آلومينيوم و چگالي پايين به عنوان گزينه اي مناسب جهت استحكام بخشي كامپوزيت هاي زمينه آلومينيوم شناخته شده است. در اين تحقيق كامپوزيت زمينه Alبا استحكام بخشهاي ذره اي Al-Al3Tiبه روش متالورژي پودر و تشكيل درجاي ذرات Al3Tiاز مخلوط پودرهاي Alو Tiتوليد گرديد. به دليل تشكيل درجاي ذرات ، پيوند تشكيل شده بين ذرات و زمينه بسيار مستحكم بوده. نتايج اين تحقيق بيانگر اين مطلب است كه مورفولوژي ذرات تشكيل شده وابسته به تنش و ميزان جاهاي خالي ايجاد شده در حين استحاله نفوذي ميباشد. از سوي ديگر تخلخل هاي ثانويه نيز به دليل ماهيت نفوذي استحاله به وجود ميآيند. بنابراين بسته به تركيب زمان تفجوشی و اندازه ذرات خواص كششي متغيري به دست مي آيد.
مقدمه
كامپوزيت هاي زمينه آلومينيوم به علت نسبت استحكام به وزن زياد و خواص فيزيكي و مكانيكي ويژه در دهه هاي اخير مورد توجه خاص محققين بوده اند و كارهاي پژوهشي بسيار زيادي در اين زمينه صورت گرفته است. استحكام بخش هاي سراميكي اغلب، اكسيدها ، كاربيدها و برايدها (TiB2,SiC,Al2O3) هستند كه در اين ميان كامپوزيت هاي ذرهاي طبيعت همسانگردي دارند و قابليت استفاده در مراحل شكل دهي بعدي به روش هاي مختلف از جمله اكستروژن ، نورد و فورج را دارا ميباشند. كامپوزيت هاي توليد شده به روش درجا (In-situ) دسته جديدي از كامپوزيت ها هستند كه از پايداري شيميايي بالايي برخوردار بوده و براي كاربردهاي پيشرفته سازه اي و سايش بسيار مناسب ميباشند. ولي اين مواد به طور وسيعي گسترش نيافته اند كه علت آن را مي توان در محدوديت هاي عمومي اين مواد مانند تردي و سايندگي زياد و ضريب انبساط حرارتي بسيار متفاوت با زمينه فلزي (كه بيشتر از خواص ذرات سراميكي نشئت گرفته است)جستجو كرد.
ABSTRACT
Al3Ti intermetallic compound is known due to its mechanical properties, chemical bonding with aluminum, good thermal stability, thermal expansion coefficient close to aluminum, and low density as an appropriate alternative for the strength of aluminum composite composites. In this study, the Al-Al3Ti particles were solidified by powder metallurgy and the formation of Al3Ti particles from a mixture of Al and Ti powders. Due to the formation of particles in the particle, the bond formed between the particles and the ground is very strong. The results of this study indicate that the morphology of formed particles is tension-dependent and the amount of vacant spaces created during intrusive transformation. On the other hand, porosities are also created due to the intrusive nature of transformation. Therefore, depending on the mixing time and particle size, tensile properties are obtained.
INTRODUCTION
Aluminum composite materials have been of particular interest to researchers due to the strength to weight ratio and special physical and mechanical properties in recent decades. There have been many research work in this field. The strength of ceramic sections is often oxides, carbides and binds (TiB2, SiC, Al2O3), in which natural particle composites are homogeneous and can be used in subsequent shaping stages in various ways such as extrusion, rolled and forged. They are. In-situ composites are a new category of composites that have high chemical stability and are very suitable for advanced structural and abrasive applications. However, these materials have not been expanded widely, due to which they can be found in the general limitations of these materials, such as tightness and abrasions, and a very different thermal expansion coefficient with metal background (which is more than the properties of ceramic particles).
Year: 2007
Publisher : 11th National Congress of metallurgy of Iran
By : Vahid Abbasi Chiane, Faraz Omidbakhsh, Soroush Nazarpour, HR Modeh Hosseini
File Information: persian Language/ 10 Page / size: 8.00 KB
سال : 1386
ناشر : يازدهمين كنگره ملي مهندسين متالورژی ايران
کاری از : وحيد عباسي چيانه ، فراز اميدبخش ،سروش نظرپور ، حميدرضا مداح حسيني
اطلاعات فایل : زبان فارسی / 10صفحه / حجم : KB 8.00
نقد و بررسیها
هنوز بررسیای ثبت نشده است.