توضیحات
چکیده
وجود تركيبات گوگردي يكي از منابع اصلي ايجاد آلودگي و توليد دي اكسيد گوگرد در حين احتراق زغالسنگ است كه استفاده از آن را محدود مينمايد. گوگردزدايی زغالسنگ به سه روش فيزيکی، شيميايی و بيولوژيکی انجام میشود. فلوتاسيون مهمترين روش فيزيکی است که به واسطه آن میتوان گوگرد پيريتی زغال را طی فرآيند شناورسازی و با استفاده از تفاوت خاصيت سطح پيريت و زغال جدا نمود. اغلب در صنعت، فلوتاسيون زغال به منظور کاهش خاکستر زغال مورد استفاده قرار میگيرد، ولی با استفاده از موادشيميايی و شرايط مناسب میتوان کاهش گوگرد زغال بوسيلة روش فلوتاسيون را نيز مورد توجه قرار داد. دراين تحقيق، تأثير مواد شيميايی مورد استفاده به عنوان كلكتور و كف ساز و همچنين تأثير غلظت پالپ بر روی کاهش گوگرد و خاکستر زغال و نيز درصد بازيافت زغالسنگ در مقياس نيمه صنعتي مورد بررسی قرار گرفته است. با توجه به نتايج اين تحقيق، كلكتور نفت سفيد نسبت به بنزول عملكرد بهتري داشته، همچنين كف ساز روغن كاج نتايج كاهش گوگرد بهتري از خود نشان داده است.
مقدمه
فلوتاسيون کف روشی مؤثر برای شستشوی بيشتر زغالها در اندازه ذرات ريز میباشد. بر خلاف ديگر فرآيندهای فيزيکی شستشوی زغال، که بر مبنای دانسيته، زغال را از مواد معدنی جدا میکند، فلوتاسيون ذرات را بر مبنای شيمی سطحشان از هم جدا میکند. اين عمل اجازه میدهد که اين فرآيند برای ساير ذرات درشتتر از حدود 10-25ميکرون و زير 1ميلیمتر بسيار مؤثر باشد. اساس فلوتاسيون کف زغال در اختلاف ترشوندگی زغال و مواد معدنی است. نظر به اينکه زغال از ترکيبات آلی تشکيل يافته، تمايل دارد که دافع آب يا آب گريز باشد. در مقابل، بيشتر مواد معدنی به آسانی بوسيلة آب تر میشوند يا آب دوست هستند. بنابراين، اگر ذرات آبگريز زغال در آب سوسپانس شوند، و هوا از ميان سوسپانسيون حباب زده شود، ذرات زغال تمايل دارند به حبابهای هوا چسبيده و تا سطح فلوته گردند. لايه کف که بر روی سطح شکل گرفته، میتواند به عنوان محصول زغال تميز برداشت شود. مواد معدنی تمايل خيلی کمی برای چسبيدن به حبابهای هوا دارند، بنابراين در سوسپانسيون باقی خواهند ماند و به عنوان باطله خارج خواهند شد. فلوتاسيون زغال مثال خوبی از يک سيستم مهندسی است که پارامترهای مهم مختلفی به شدت به هم وابسته هستند. تغييرات برای تنظيم کردن يک فاکتور به طور اتوماتيک باعث يا نيازمند تغيير در ديگر قسمتهای سيستم خواهد شد.
ABSTRACT
The presence of sulfur compounds is one of the main sources of contamination and the production of sulfur dioxide during combustion of coal, which limits its use. The desulphurisation of coal is carried out in three physical, chemical and biological methods. Flotation is the most important physical method by which the sulfur content of coal can be removed during the flotation process using the difference in the property of pyrite and charcoal. Often in coal industry, coal flotation is used to reduce coal ash, but using chemical materials and appropriate conditions, it is possible to reduce the sulfur content of coal by the flotation method. In this research, the effect of chemicals used as collector and floor washer and also the effect of pulp concentrations on reducing sulfur and coal ash and coal recycling percentages in semi-industrial scale have been investigated. According to the results of this study, the white oil collector has better performance than benzene, and also the pumice stove has improved the sulfur content.
INTRODUCTION
Flotation of the floor is an effective way for more coal to be washed in small particle size. Unlike other physical processes of coal washing, which, based on density, separates coal from minerals, particle flotation separates the particles based on the chemistry of their surface. This allows the process to be effective for particles larger than about 25-25 microns and below 1 millimeter. The basis of coal flotation is the difference in the wettability of coal and minerals. Due to the fact that charcoal is made up of organic compounds, it tends to be repellent of water or water. In contrast, most minerals are easily watered or water-loving. Therefore, if coal-water particles are susceptible to water, and air is bubbled through the suspension, coal particles tend to stick to air bubbles and flood the surface. The surface layer formed on the surface can be cleaned as a charcoal product. Minerals tend to be very tight to stick to air bubbles, so they will remain in the suspension and leave the tailings. Coal flotation is a good example of an engineering system, with many important parameters that are heavily interdependent. Changes to set up an invoice automatically trigger or require changes to other parts of the system.
Year: 2007
Publisher : 11th National Congress of metallurgy of Iran
By : Mohammad Reza Ehsani, Farahnaz Eghbali Babadi
File Information: persian Language/ 11 Page / size: 158 KB
سال : 1386
ناشر : يازدهمين كنگره ملي مهندسين متالورژی ايران
کاری از : محمد رضا احساني ، فرحناز اقبالی بابادی
اطلاعات فایل : زبان فارسی / 11 صفحه / حجم : KB 158
نقد و بررسیها
هنوز بررسیای ثبت نشده است.