توضیحات
چکیده
در اين تحقيق، علت شکست غلتكهای كوره آنيل پيوسته واحد گالوانيزه شركت فولاد مباركه، ساخته شده فاز ولاد آستنيتي G-X40CrNiSi25-12به، وسيله آناليز شيمياي ،ي آزمايش متالوگرافي، ريزسختي سنجي ويکرز، تفرق اشعه ايكس و بررسي مسير انتشار ترک در نمونه های تهيه از شده ناحيه شكسته شده، مورد بررسي قرار گرفته است.نتایج ها بررسي نشان ميدهد که تشكيل فاز سيگماي مرزدانه در اي دوره طولاني مدت قرارگيري در درجه حرارت های بالاتر از ،650oCعامل كاهش تافنس غلتك در دماهاي پايين و در دوره هاي توقف خط ميباشد. بنابراين، در هنگام توقف خط، تاب گيري غلتك و يا راه اندازي مجدد خط، ترك خوردگي در امتداد فاز سيگما باعت شكست غلتكها شده است.
مقدمه
فولادهاي زنگ نزن آستنيتي گ هختير ري شده، گروهي از فولادهاي کروم دار يم باشندکه به علت مقاومت در برابر خوردگي و اكسيداسيون يا ، به طور گسترده در محیط های آبي (زیر 650oC) و کاربردهاي دماي بالا(بالاتر از650oC ) استفاده ميشوند. آلیاژهاي آهن-کرم-نیکل بطور كامل يا جزئي آستنیتی می باشند و نسبت به آلياژهاي آهن-کرم، ريپذ استحکام و انعطاف ي ي ب شتري از خود نشان ميدهند. نوع HHاين آلياژها، از استحکام بالا و مقاومت عالي در برابر اکسیداسون تا دماي 1095oCبرخوردار است. در اين فولادها، با تنظيم تركيب شيميايي، امكان دستيابي به محدوده وسيعي از خواص وجود دارد. اولین مشاهدات واقعي فاز سيگما در آلياژهاي آهن-کرم در سال 1927گزارش شده است. با رسوب فاز سي ،گما فولاد بسيار ترد و شکننده ميگردد. بعد از قطعي شدن وجود فاز سيگما، مطالعات بسیاری جهت تعيين ترکیبات شیمیایی و دماهايي که بالاتر از آن فاز سيگما مي تواند تشکیل شود، صورت گرفت. دمايي که در آن فاز سيگما تشکیل ميگردد به ترکيب شیمیایی فلز بستگي دارد. در بيشتر فولادهاي زنگ نزن آستنيتي حاوي 25درصد کرم و 12تا 20درصد نیکل، فاز سيگما در درجه حرارتي بین 650تا 900oC( با حداکثر نرخ تشکيل در850oC ) تشکيل ميشود. فاز سيگما در امتداد مرز دانه ها تشکيل شده و سختي برابر ( 68 RC (940 HVدارد. بیيشترین میزان اثرات منفي ناشي از تردي فاز سيگما در دماي اتاق است. به عبارت ديگر، در صورت بارگذاري بر روي قطعه حاوي مقدار كمي فاز سيگما در دماي پايين، امكان ترك خوردن قطعه بسيار زياد است.
ABSTRACT
In this research, the cause of the failure of annealed annealing roller of galvanized furnace unit of Mobarakeh Steel Company was made by the G-X40CrNiSi25-12 austenitic phase, by chemical analysis, metallographic testing, microcrystalline Vickers, X-ray diffraction and investigation of the crack propagation pathway in samples The results of the study show that the formation of the boundary sigma phase in the long-term exposure period at temperatures above 650 ° C is a factor in reducing the roller towbars at low temperatures and in stopping lines. . Therefore, when the line is stopped, roller rolling or re-start, the cracking along the sigma phase has been the cause of the failure of the rollers.
INTRODUCTION
Austenitic stainless steels are a group of chrome steels that are used for corrosion and oxidation resistance, or widely used in aqueous (below 650 ° C) and high temperature applications (above 650 ° C). The iron-nickel-nickel alloys are either fully or partly austenitic, and are more resistant to iron-worm alloys than the strength and elasticity of the alloy. HH type These alloys have high strength and excellent oxidation resistance up to 1095 ° C. In these steels, by adjusting the chemical composition, it is possible to achieve a wide range of properties. The first real observations of the Sigma phase in iron-worm alloys were reported in 1927. With the deposition of the C phase, the steel core becomes very fragile and fragile. After confirming the existence of the sigma phase, many studies have been carried out to determine the chemical composition and temperatures that can be formed above the sigma phase. The temperature at which the sigma phase is formed depends on the chemical composition of the metal. In most austenitic stainless steels containing 25% cream and 12 to 20% nickel, the sigma phase is formed at a temperature between 650 and 900 ° C (with a maximum formation rate of 850 ° C). The sigma phase is formed along the grain boundary and has a hardness of 68 RC (940 HV). The most negative effect is the sigma phase shrinkage at room temperature, in other words, if loaded on a piece containing a small amount of Sigma phase at a temperature Down, it is possible to leave the piece very high.
Year: 2007
Publisher : 11th National Congress of metallurgy of Iran
By : Ghasem Deeni, Mohammad Hossein Bina, Seyyed Mahmoud Moniroufaghi, Ali Yazdukhasti, Shahram Abbasi
File Information: persian Language/ 9 Page / size: 599 KB
سال : 1386
ناشر : يازدهمين كنگره ملي مهندسين متالورژی ايران
کاری از : قاسم ديني ،محمد حسين بينا ،سيد محمود منيرواقفي ،علي يزدوخواستي ،شهرام عباسي
اطلاعات فایل : زبان فارسی / 9 صفحه / حجم : KB 599
نقد و بررسیها
هنوز بررسیای ثبت نشده است.