توضیحات
چکیده
در اين تحقيق پوشش نانوكريستالي آلياژي دوتايي Ni/Coاز حمام واتز در دو وضعيت بدون ساخارين و حاوي 1g/litساخارين توسط جريان مستقيم بر رو يزم ي نه فولاد ساده كربني ايجاد شد. پوشش دهي در چگالي جريان هاي 104و 12 mA/cm2انجام شد. با استفاده از آزمون تفرق اشعه ایكس، ضرايب بافت نمونه ها محاسبه شد، همچنين با استفاده از قانون شرر اندازه دانه ها نيز محاسبه گرديد. از آزمون پلاريزاسيون تافل و پلاريزاسيون سيكلي براي بررسي رفتار خوردگي اين پوشش در محيط %5/3وزني كلريد سديم استفاده شد. نتايج آزمايشات نشان مي دهند كه افزودن ساخارينبه حمام پوشش دهي موجب كاهش اندازه دانه ها و كاهش شدت بافت حاصل در پوشش مي شود. در غياب ساخارين بافت به صورت تك جزئي شامل صفحه {311} است كه با افزايش چگالي جريان (104mA/cm2 ) از {311} به {200} تغيير مي يابد. نتايج آزمايشات خوردگي نشان داد كه اين تغيير چگالي جريان و در نتيجه تغيير بافت موجب بهبود مقاومت به خوردگي پوشش نانوكريستالي Ni/Co شد.در حضور ساخارين و در چگالي جريان (mA/cm2 12 ) يك بافت ضعيف مشاهده شد كه عمدتاً شامل صفحه {311} است و با افزايش چگالي جريان به 104mA/cm تغييري در آن مشاهده نشد. اين مطلب با عدم تغيير سرعت خوردگي تصديق شد.
مقدمه
در دو دهه اخير رسوب الكتريكي، به عنوان ابزاري موثر و مفيد براي توليد آلياژهاي نانوكريستالي در كاربردهاي مغناطيسي گوناگون شناخته شده است. رسوب الكتريكي آلياژي Ni/Coبه عنوان يك ماده مهندسي مهم، به علت خواص منحصر به فردش همچون خواص مغناطيسي يا مقاومت مغناطيسي بالا هدايت حرارتي بالا مقاومت سايشي خوب و فعاليت الكتروكاتاليتيكي مناسب در بسياري از صنايع مورد استفاده قرار مي گيرد. كاربردهاي اين آلياژ در وسايل مغناطيسي گوناگون، خصوصاً تكنولوژي ميكروسيستم ها براي توليد سنسورها، ميكرو رله ها و القاگرهاست. دردو دهه اخير، استفاده از آلياژهاي Ni/Coبراي توليد قطعات سه بعدي، ساخت قطعات با شكل هاي پيچيده و قطعات منحصر به فرد با استفاده از روش الكتروفورمينگ گسترش يافته است . تحقيقات در مورد رسوب الكتريكي آلياژي Ni/Coنشان مي دهد كه ريزساختار و خواص آن بستگي شديدي به درصد كبالت موجود در پوشش دارد. مقدار كبالت در پوشش بوسيله پارامترهاي آزمايش همچون تركيب حمام، دما، ،pHچگالي جريان و غيره كنترل مي شود.
ABSTRACT
In this study, nanocrystalline coating of Ni / Co double bonding from Watz’s bath in two states without saccharin containing 1g / lit saccharin was created by direct flow of simple carbon steel. Coverage was carried out at a flow density of 104 and 12 mA / cm2. By using X-ray diffraction test, the tissue coefficients of the samples were calculated, and the grain size was also calculated using Shirer’s law. A TOEFL polarization test and cyclic polarization were used to examine the corrosion behavior of this coating in a 3.5% NaCl solution. The results of the experiments show that the addition of saccharin to the coating bath reduces grain size and decreases the tissue texture in the coating. In the absence of saccharin, the tissue is an integral part of the plate {311}, which changes from {311} to {200} by increasing the flow density (104mA / cm2). The results of corrosion tests showed that this change in flow density and as a result of tissue changes improved the corrosion resistance of nanocrystalline Ni / Co coatings. In the presence of saccharin and in flow density (12 mA / cm2), a weak tissue was observed, mainly consisting of { 311} and there was no change in the flow density to 104mA / cm. This was confirmed without changing the corrosion rate.
INTRODUCTION
In the last two decades, electric deposition has been recognized as an effective and useful tool for the production of nanocrystalline alloys in various magnetic applications. The Ni / Co alloy is used as an important engineering material due to its unique properties such as magnetic properties or high magnetic resistance. High thermal conductivity, good abrasion resistance and appropriate electro-Catholic activity are used in many industries. The applications of this alloy are various in magnetic devices, especially microsystems, for the production of sensors, micro-relays and inductors. In the last two decades, the use of Ni / Co alloys for the production of three-dimensional components, the development of components with complex shapes and unique components has been expanded with the use of electroforming. Research on the Ni / Co alloy’s electrodeposition shows that the microstructure and its properties depend heavily on the percentage of cobalt contained in the coating. The amount of cobalt in the coating is controlled by the test parameters such as bath composition, temperature, pH, flow density, and so on.
Year: 2007
Publisher : 11th National Congress of metallurgy of Iran
By : Shakrallah Hasani, Keyvan Reyesi, Mohammad Ali Golzar
File Information: persian Language/ 11 Page / size: 318 KB
سال : 1386
ناشر : يازدهمين كنگره ملي مهندسين متالورژی ايران
کاری از : شكراالله حسني ، كيوان رئيسي ، محمد علي گلعذار
اطلاعات فایل : زبان فارسی / 11 صفحه / حجم : KB 318
نقد و بررسیها
هنوز بررسیای ثبت نشده است.