توضیحات
چکیده
در هاردمتال هاي پايه كاربيدتنگستن كه با روش متالورژي پـودر توليـد مـيشـوند، اعمـال شـرايط پخـت مناسب منجر به حصول خواص بهينه ميگردد. در اين تحقيق تاثير تركيبات مختلف و شرايط آماده سازي مواد پودري و شرايط پخت بر روي خواص فيزيكي(دانسيته، درصد انقباض پخت و ميزان تخلخل) مـورد بررسي قرار گرفته است. نتايج نشان ميدهد كه گرانوله نمودن پودر باعث بهبود خواص فيزيكي محصول ميگردد. همچنين تركيبات 10و 12درصد كبالت، در دماي پخت 1400◦Cنتايج مطلوبي را بـه دنبـال دارد.
مقدمه
امروزه هاردمتال هاي پايه کاربيدتنگستن به طور گسترده در ابزارهاي بـرش و سـايش بـدليل سـختي بـالا، مقاومت به سايش و استحكام مناسب استفاده ميشوند. يكي از اهـداف مهـم در سـاخت WC-Co رسيدن به تراكم مناسب است. لذا چگـالش ايـن محـصولات از طريـق انجـام عمليـات زينتـر امكـان پـذير است. خواص هاردمتال ها به ميزان زيادي تحت تاثير ريزساختار آن میباشد. ها در حقيقت خواص هاردمتال عمدتاً به ترکيب شيميايي و خلوص کاربيد و فازهاي زمينه، اندازه و شکل ذرات کاربيدی، نسبت هاي کاربيد و فازهاي زمينه، ميزان و حد حلاليت کاربيدها، اضافه يا کم بودن ميزان کربن، تغييرات در ترکيب شيميايي و ساختار که توسط نفوذ يا جدايش ايجاد مي شود، روش هاي آماده سازی و توليد، خصوصاً آسياب کردن، کربوريزاسيون و روش هاي زينتر و انواع مواد خام، بستگي دارد. لذا بررسي نحوه زينتر قطعات و تاثير آن بر خواص فيزيكي همواره مورد بحث بوده است. در محدوده دمايي پخت، قطعه تقريباً به فشرده ترين حالت خود ميرسد. در اين شرايط، اندازه ذرات كاربيدي بدون تغيير و در همان وضعيت اوليه خود باقي ميماند. كاربيدهاي ريزدانه، داراي شكل بي قاعده بوده و توزيع يكنواختي در زمينه ندارند. فاز كبالت نيز توزيع نامناسبي داشته و در برخي مناطق تجمع بيشتري دارد. همچنين مقادير قابل توجهي تخلخل در قطعه وجود دارد. اگر قطعه براي مدت زمان 30تا 90دقيقه در محدوده دمايي بالاتر از 1350◦Cنگهداري شود، مذاب كبالت در اثر نيروي مويينگي، توزيع يكنواختي در ميان ذرات كاربيدتنگستن پيدا ميكند و به طور همزمان توزيع ذرات كاربيد نيز يكنواخت تر ميگردد.
ABSTRACT
In carbide tungsten hardmetals that are produced by powder metallurgy, applying appropriate cooking conditions leads to optimal properties. In this research, the effect of different compositions and conditions of preparation of powdered materials and cooking conditions on physical properties (density, cooking contraction percentage and porosity) have been investigated. The results show that granulation of the powder improves the physical properties of the product. Also, 10 and 12% cobalt compounds have favorable results at a temperature of 1400 ° C.
INTRODUCTION
Today, carbide tungsten hardmetals are widely used in cutting and abrasive tools due to their high hardness, abrasion resistance and proper strength. One of the important goals in making WC-Co is to reach the appropriate density. Therefore, the condensation of these products is possible through Zainter’s operation. Hardmetal properties are highly affected by its microstructure. In fact, the hardmetal properties are mainly due to the chemical composition and purity of the carbide and the background phases, the size and shape of the carbide particles, the carbide ratios and the phase phases, the amount and solubility of the carbides, the addition or absence of carbon, changes in the chemical composition and structure, Penetration or separation, the preparation and production methods, especially milling, carburization, and alloys and all kinds of raw materials, depend on. Therefore, the study of the nature of parts and its effect on physical properties has always been discussed. At the temperature range of the bake, the piece reaches its most compact position. Under these conditions, the size of the carbide particles remains unchanged and remains in its original state. Microfine carbides have an irregular shape and do not have uniform distribution. Cobalt phase also has an inappropriate distribution and is more aggregated in some areas. There are also significant amounts of porosity in the piece. If the piece is stored for a period of 30 to 90 minutes at a temperature range above 1350◦C, the cobalt molybdenum, due to the capillary force, finds a uniform distribution among the carbide tungsten particles, and simultaneously the distribution of carbide particles is even more uniform.
Year: 2007
Publisher : 11th National Congress of metallurgy of Iran
By : Hamed Ali Akbarzadeh, Maryam Waliie
File Information: persian Language/ 10 Page / size: 445 KB
سال : 1386
ناشر : يازدهمين كنگره ملي مهندسين متالورژی ايران
کاری از : حامد علي اكبرزاده،, مريم وليعي
اطلاعات فایل : زبان فارسی / 10 صفحه / حجم : KB 445
نقد و بررسیها
هنوز بررسیای ثبت نشده است.