توضیحات
چکیده
كامپوزيت هاي زمينه فلزي تقويت شده با فاز سراميك به عنوان دسته مهمي از مواد شـناخته مـي شـوند كـه جهـت كاربردهـاي الكتريكي ، حرارتي ، سايشي و ساختاري مورد استفاده قرار مي گيرند. وجود فـاز سـراميك در زمينـه اي فلـزي باعـث افـزايش خواص مكانيكي همچون مقاومت به سايش و سختي كامپوزيت مي شود و دايره كاربرد محصول را افزايش مي دهد. در پروژه حاضر تاثير افزودن %0-15پودر سراميكي زيركن (ZrSiO4) بر ريزساختار و خـواص كامپوزيـت زمينـه آلومينيـومي مورد بررسي قرار گرفته است. كامپوزيت آلومينيوم- زيركن مورد بحث از دو دسته مواد حاصل شده است: آلومينيومA356.1 به عنوان فاز زمينه و پودر زيركن به عنوان فاز تقويت كننده . فاز سراميكي زيركن به دليـل دارا بـودن سـختي بـالا و نيـز مـدول الاستيسيته عالي ، گزينه اي مطلوب جهت افـزودن بـه زمينـه اي آلومينيـومي محـسوب مـي شـود. ريزسـاختار نمونـه هـا توسـط ميكروسكوپ الكتروني عبوري (SEM) مورد مشاهده قرار گرفته است. تركيب شيميايي كامپوزيت توسط آناليز XRDاندازه گيري شد. سختي سنجي و تعيين استحكام كششي نمونه ها نيز انجام شد. در پايان تاثير افزودن سراميك زيركن بر خواص مورد نظر كامپوزيت بررسي و درصد بهينه افزودن تقويت كننده مشخص گرديد. نتايج از بهبود قابل توجه اسـتحكام و سـختي نمونـه هاي كامپوزيتي نسبت به نمونه بدون زيركن دلالت دارد.
مقدمه
در چند دهه اخير تكامل قابل توجهي در تكنولوژي توليدوبكارگيري كامپوزيت ها حاصل شده است از. اين دسته جديد مواد به منظور دستيابي به قابليت هايي كه از توانايي هريك از اجـزا آن بـه تنهـايي خـارج اسـت استفاده مي شود. علاوه بر آن ، خواص فيزيكي كامپوزيت هاي زمينـه فلـزي هميـشه در نتيجـه قـرار دادن تقويت كننده ها بهبود مي يابد. استفاده روزافزون از كامپوزيت ها در صنايع هوافضا و ديگر صـنايع بـه علـت خواص فيزيكي و مكانيكي بهتر اين مواد نسبت به آلياژهاي تك فازي(مونوليتيـك) اسـت و لـذا افـزايش در استفاده از كامپوزيت ها را در مصارف گوناگون شاهد هستيم. علت تقسيم بندي كامپوزيت ها براساس نوع فاز زمينه به علت نقش مهم فاز زمينه در ساختار كامپوزيت است. وظيفه اصلي فاز زمينه محافظـت از فـاز تقويت كننده بكار رفته در كامپوزيت است و زمينه در عين حالي كه پيوستگي سيـستم را حفـظ مـي كنـد بـه توزيع و انتقال نيرو به فاز تقويت كننده نيز كمك مـي نمايـد.
ABSTRACT
Ceramic-reinforced metal reinforced metal composites are known as an important category of materials used for electrical, thermal, wear and structural applications. The existence of a ceramic phase in a metal substrate increases mechanical properties such as wear resistance and hardness of the composite, and increases the application area of the product. In the present project, the effect of adding zinc-ceramic powder (ZrSiO4) on the microstructure and properties of aluminum composite composites has been investigated. The aluminum-zircon composite is discussed in two groups of materials: aluminum A356.1 as a background phase and zircon powder as a reinforcing phase. Due to its high hardness and high elasticity modulus, the zircon ceramic phase is an ideal choice for adding to the aluminum foil. The microstructure of the specimens was observed by passing electron microscopy (SEM). The chemical composition of the composite was measured by XRD analysis. Hardness test and determination of tensile strength of samples were also performed. Finally, the effect of adding zircon ceramic on the properties of the composite was studied and the optimal percentage of reinforcing additive was determined. The results indicate a significant improvement in the strength and hardness of composite samples compared to the non-zirconium sample.
INTRODUCTION
In recent decades, considerable development has been achieved in the production technology for the use of composites. This new material category is used to achieve capabilities that are out of the ability of each component alone. In addition, the physical properties of metal-based composites always improve as a result of reinforcing inserts. The increasing use of composites in the aerospace and other industries is due to their better physical and mechanical properties than single-phase alloys (monolithic), and so we see an increase in the use of composites in various uses. The reason for the classification of composites is based on the type of background phase due to the important role of the background phase in the structure of the composite. The main task of the phase phase is to protect the phase amplifier used in the composite, and the background, while maintaining the continuity of the system, also helps to distribute and transfer the power to the amplifier phase.
Year: 2007
Publisher : 11th National Congress of metallurgy of Iran
By : Kamyar Shirvani Moghadam, Hossein Abdizadeh, Hamidreza Baharvvi, Nasser Ehsani, Seyed Vahedi Vakili, Ammar Khansari
File Information: persian Language/ 10 Page / size: 925 KB
سال : 1386
ناشر : يازدهمين كنگره ملي مهندسين متالورژی ايران
کاری از : كامیار شيرواني مقدم ,حسين عبدي زاده , حميدرضا بهاروندي ,ناصر احساني ,سيدوحيد سيد وكيلي, عمار خوانساري
اطلاعات فایل : زبان فارسی / 10 صفحه / حجم : KB 925
نقد و بررسیها
هنوز بررسیای ثبت نشده است.