توضیحات
چکیده
در طراحي اغلب سازه ها از سيستم هاي باربر جانبي در راستاي دو جهت اصلي و متعامد ساختمان استفاده ميشود . در اين سيستمهاي باربر جانبي، عملكرد ستون به عنوان عنصر اصلي در تحمل تقاضا هاي مقاومتي و عملكردي حاصل از زلزله در هر دو راستاي عمود بر هم، از اهميت ويژه اي برخوردار است.از آن جا كه در محل تلاقي سيستم هاي باربر جانبي تأمين سختي و مقاوت كافي در دو راستاي متعامد با پيچيدگي هاي خاص همراه است، استفاده از مقاطع با رفتار مشابه حول هر دو محور اصلي براي ستون ها ضروري به نظر مي رسد. مقاطع صليبي داراي رفتار مشابه در هر دو راستا مي باشند و در ظاهر بدليل باز بودن مقطع، انجام اتصالات مرتبط با ورق هاي پيوستگي و اتصالات تير به ستون سهل تر به نظر مي رسد. به طور معمول از المان تير-ستون معمولي براي تحليل سازه ها با ستونهاي صليبي استفاده ميشود. ممان اينرسي اين مقاطع نيز برابر مجموع ممان اينرسي مقاطع Iشكل تشكيل دهنده آن در نظر گرفته ميشود و فرض ميشود توزيع لنگر در اين مقاطع بر اساس سختي اين عناصر انجام ميشود. در اين تحقيق با استفاده از تحليلهاي عددي غيرخطي محدوده اعتبار اين فرض مورد بررسي قرار ميگيرد. همچنين تأثير جزئيات اتصال بر چگونگي توزيع لنگر در مقطع، مورد بررسي قرار ميگيرد. در پايان جزئيات جديد براي تقويت ناحيه چشمه اتصال تير به ستون صليبي ارائه ميشود و اثر آن بر بهبود چگونگي توزيع لنگر بين اجزاي مقطع نشان داده ميشود.
مقدمه
تمام سازه ها براي انتقال بار ثقلي و جانبي وارد بر ساختمان، داراي سيستمهاي باربر ثقلي و جانبي ميباشند. در اكثر سيستمهاي باربر ثقلي و جانبي ستون يكي از اجزاي اصلي سيستم باربر است. عمدتاً سيستمهاي باربر جانبي سازه در راستاي دو جهت اصلي و متعامد ساختمان قرار ميگيرند.. بخش مهمي از عملكرد سيستم باربر ثقلي و جانبي به عملكرد ستونهاي آن، كه وظيفه انتقال بار در ارتفاع سازه را به عهده دارند، وابسته است. ستونهاي محل تلاقي اين دو سيستم متعامد بدين دليل كه بايد داراي سختي و مقاومت كافي در هر دو راستا باشند، يكي از اجزاي نسبتاً پيچييده در سازه ها ميباشند. به علاوه اين ستون ها بايد امكان ايجاد اتصال صلب را در هر دو جهت فراهم آورند.
ABSTRACT
In designing most structures, lateral load systems are used in the direction of the main and orthogonal directions of the building. In these lateral load bearing systems, the performance of the pillar as the main element in tolerating the strength and performance requirements of the earthquake in both vertical directions is of particular importance. Since the intersection of the lateral load system is the supply of hardness And sufficient resistance in two orthogonal directions is associated with particular complexities, the use of sections with similar behavior around the two main axes for the columns seems necessary. Cross sections have similar behavior in both directions, and because of the openness of the section, joining the joints with joints and joints to the column seems easier. Typically, a typical columnar element is used to analyze structures with cross columns. The inertia of these sections is equal to the total inertia of the I-shaped sections of the inertia, and it is assumed that the anchor distribution in these sections is based on the hardness of these elements. In this research, the validity of this assumption is evaluated using nonlinear numerical analysis. Also, the effect of connecting details on the distribution of anchor at a cross section is examined. At the end of the new detail to reinforce the fountain area, the connection of the beam to the cross column is presented and its effect on improving the anchor distribution between the cross sections is shown.
INTRODUCTION
All structures for carrying gravity and lateral load on the building have gravity and lateral load systems. In most gravity and lateral loader systems, the column is one of the main components of the load carrier system. Mainly the lateral load bearing systems are located in the direction of the main and orthogonal directions of the building. An important part of the performance of the gravity and lateral load system is the dependence on the performance of its columns, which are responsible for the load transfer at the height of the structure. The columns of the intersection of these two orthogonal systems, due to the fact that they must have sufficient hardness and strength in both directions, are one of the components that are relatively complex in the structures. In addition, these columns should allow for rigid connection in both directions.
Year: 2011
Publisher : Sixth National Congress on Civil Engineering
By : Seyyed Rasoul Mirghadari , Mohammad Motati Nasrabadi
File Information: persian Language/ 8 Page / size: 319 KB
Only site members can download free of charge after registering and adding to the cart
سال : 1390
ناشر : ششمین کنـگره ملی مهنـدسی عمـران
کاری از : سيد رسول ميرقادري ، محمد مطلبي نصرآبادي
اطلاعات فایل : زبان فارسی / 8 صفحه / حجم : KB 319
نقد و بررسیها
هنوز بررسیای ثبت نشده است.