توضیحات
چکیده
از جمله نرم افزارها اجزاء محدود ميتوان به نرم افزار ABAQUSاشاره نمود كه به دليل دارا بودن مدل هاي رفتاري پيشرفته و متنوع براي مواد مختلف ( فلزات، بتن، خاك، سنگ، سيالات و و …) امكان ايجاد سريع مدل هاي با هندسه پيچيده و … نظر بسياري از محققين را به خود جلب نموده است. در ميان نرم افزارهاي اجزاء محدود همچون PLAXIS ،ABAQUS ،ANSYSنرم افزار ABAQUSدر مدل كردن رفتار واقعي بتن توانايي بيشتري دارد. در اين نرم افزار جهت مدل كردن كامپوزيت هاي FRPاز المان هاي مختلفي (Hemosion , Surface) از خانواده المان هاي Shellو از نوع همه منظور(General Purpose) ميتوان استفاده نمود. در اين مقاله قاب هاي بتني توسط ABAQUSبا انواع المان هاي مختلف Shellتقويت و مدلسازي ميگردند و حالت هاي مختلف مقاوم سازي با يكديگر مقايسه و ارزيابي ميشوند.
مقدمه
تلاش محققان در سال هاي اخير در راستاي مقاوم سازي به منظور تقويت ساختمان هاي فرسوده و يا بخاطر بالابردن ظرفيت باربري اعضاي بتني باعث ارائه راهكارهاي جديدي در علم مهندسي ترميم سازه ها شده است، كه با جايگزيني شيوه هاي جديد مقاوم سازي در جهت سهولت مقاوم سازي و بالابردن ظرفيت سازه ها باعث شده تا مهندسين سازه روي به استفاده از سيستم هاي پليمري تقويت شده (FRP) بياورند. در اين ميان بسيار كمتر به قاب هاي بتن آرمه، كه چارچوب اصلي و باربر سازه هاي بتن آرمه در مقابل بارهاي جانبي و زلزله را تشكيل ميدهند و متشكل از تيرها و ستون ها و اتصالات ميباشند، پرداخته شده است. لذا مطالعات محدود بر روي قاب هاي بتن آرمه بهسازي شده با كامپوزيت هاي FRPباعث شد كه در اين تحقيق رفتار قاب هاي بتن آرمه بهسازي شده با اين كامپوزيتها و تاثير اين مواد در افزايش شكل پذيري و ظرفيت باربري قاب ها توسط المان هاي مختلف پوسته اي جهت مدلسازي كامپوزيت هاي FRPدر نرم افزار ،ABAQUSارزيابي و مورد بررسي قرار گيرد.
ABSTRACT
And … the opinion of many researchers has attracted. Among the limited component software such as PLAXIS, ABAQUS, ANSYS, ABAQUS software has the ability to model actual concrete behavior. In this software, a variety of elements (Hemosion, Surface) can be used to model FRP composites from the Shell element family of general purpose. In this paper, concrete frames by ABAQUS are amplified and modeled with various Shell elements, and various retrofitting modes are compared and evaluated.
INTRODUCTION
The efforts of researchers in recent years to retrofit buildings in order to strengthen eroded buildings or to increase the load capacity of concrete members have provided new solutions in the field of structural engineering engineering, which, by replacing new retrofitting techniques for ease of retrofitting And increasing the capacity of structures has led ZEN engineers to use reinforced polymer systems (FRP). In this case, much less are the frames of the reinforced concrete, which are the main frame and the barrier of reinforced concrete structures against lateral loads and earthquakes, consisting of beams and columns and joints. Therefore, limited studies on reinforced concrete frames reinforced with FRP composites resulted in the behavior of reinforced concrete frames modified with these composites and the effect of these materials on increasing the ductility and loading capacity of frames by different shell elements The modeling of FRP composites in ABAQUS software should be evaluated and evaluated.
Year: 2011
Publisher : Sixth National Congress on Civil Engineering
By : Naser Nosrat Zahi, Hamed MaKhodomi
File Information: persian Language/ 8 Page / size: 380 KB
Only site members can download free of charge after registering and adding to the cart
سال : 1390
ناشر : ششمین کنـگره ملی مهنـدسی عمـران
کاری از : ناصر نصرت زهي ،حامدمخدوم
اطلاعات فایل : زبان فارسی / 8 صفحه / حجم : KB 380
نقد و بررسیها
هنوز بررسیای ثبت نشده است.