توضیحات
چکیده
با گسترش معدن کاری میزان آلودگی وارد شده به محیط نیز افزایش می یابد. از آلودگی وارد شده به محیط می توان آلودگی آب را نام برد که باعث ورود آلاینده ها به سفره آب های زیرزمینی می شود. در این مقاله سعی بر محاسبه ضریب هدایت هیدرولیکی محیط اشباع در یک محفظه ماسه ای آزمایشگاهی با استفاده از روش پردازش تصویر و اندازه گیری دبی جریان خروجی از آن شده است. پدیده انتقال در محیط با استفاده از دو ردیاب رنگی پرمنگنات و غیر واکنشی اورانین در محیط آزمایشگاه مدلسازی فیزیکی شده است. برای ترجمان از نور تک رنگ آبی و در عکس برداری پرمنگنات از نور سفید استفاده شده است. تصاویر با استفاده از یک دوربین تصویربرداری نیمه حرفه ای رنگی جمع آوری شده است بعد از کالیبره کردن تصاویر با مقدار غلظت مقدار شدت رنگ ( لومیناسیون) در هر نقطه به عنوان غلظت آن پیکسل در نظر گرفته شده است. با رسم منحنی رخنه در نقطه تزریق و مرز خروجی با استفاده از داده های پردازش تصویر و محاسبه زمان خروج کامل ردیاب از محیط سرعت محاسبه شده است که با در نظر گرفتن این مقدار در قانون دارسی و ثابت بودن هد در مرز ورودی و خروجی ضریب هدایت هیدرولیکی و قابلیت انتقال سفره محاسبه شده است. در گام بعدی با اندازه گیری دبی خروجی از مدل فیزیکی و در نظر گرفتن اختلاف های متفاوت اعمالی مقدار ضریب هدایت هیدرولیک محیط ماسه ای برابر با مقدار 4 – 10 × 0.412 متر بر ثانیه محاسبه شده است.
مقدمه
مقدار رقیق شدگی پلوم آلودگی در محیط متخلخل ازنظر هیدرولوژی، محیط زیست و مهندسی مخزن کاربردی اهمیت فراوانی دارد. (Aeby et al, 2001) رقیق شدگی نقش اساسی در تعریف استراتژی گیاه پالایی ، سطح میرایی غلظت آلودگی در زمین و (Barns et al, 2012) و کاهش ریسک سلامتی انسان(Aureli et al, 2011) (Aksoy et al, 2010) مقیاس حوضه آبریز دارد. شدت رقیق شدگی در فرآیند انتقال در محیط متخلخل وابسته به پیچیدگی اثر متقابل هدایت هیدرولیکی و شدت انتشار و مقیاس محلی مکانیسم پراکندگی است. تغییرپذیری هدایت هیدرولیکی منجر به گسترش پلوم میشود که سطح بین محلول و سیال اطراف را میدهد. درنتیجه هتروژن بودن محیط میزان رقت افزایش مییابد (Barrero et al, 2010) (Capilla and Capilla, 2010a)دو روش اصلی برای اندازه گیری پراکندگی آلاینده در مدل های فیزیکی سفره به شرح زیر است. روش اول که در مطالعات برجا استفاده میشود که با اندازه گیری غلظت آلاینده همراه است.
ABSTRACT
With the expansion of mines, the amount of contamination entered into the environment also increases. Pollution from the environment can be termed water pollution, which leads to the introduction of pollutants into the groundwater table. In this paper, we tried to calculate the hydraulic conductivity coefficient of the saturated environment in a laboratory sandbox using an image processing method and measuring the flow rate of the output stream. The phenomenon of transmission in the environment is carried out using two colorimetric permanganate and non-reactive uranin detectors in the physical modeling laboratory environment. The translucent blue light is used and the permanganate is taken from white light. The images were collected using a semi-professional imaging camera. After calibrating the images with a concentration value, the amount of color intensity (lumination) at each point is considered as the concentration of that pixel. By plotting the infiltration curve at the injection point and the output boundary using image processing data and calculating the total exit time of the detector from the velocity environment, it is calculated by taking into account this value in the Darcy law and the constant of the head at the input and output boundary of the conduction coefficient Hydraulic and tank transferability are calculated. In the next step, by measuring the discharge rate of the physical model and taking into account the different differences, the value of the hydraulic conductivity coefficient of the sand environment is calculated to be 0.4-110 × 0.412 m / s.
INTRODUCTION
The amount of dilution of plum contamination in the porous medium is important in terms of hydrology, environment and applied reservoir engineering. (Aversi et al., 2001) dilution has a major role in defining the strategy of plant treatment, the level of intrinsic concentration of pollution in the earth (Barns et al., 2012) and the reduction of human health risk (Aurelio et al., 2011) Basin catchment scale. The dilution intensity in the transfer process in the porous medium depends on the complexity of the interaction between the hydraulic conductivity and the intensity of emission and the local scale of the dispersion mechanism. The variability of hydraulic conductivity leads to the expansion of the plume, which gives the surface between the solution and the fluid in the vicinity. As a result of the heterogeneity of the environment, the degree of dilution increases (Barrero et al., 2010) (Capilla and Capilla, 2010a). The two main methods for measuring the dispersion of pollutants in the physical models of the table are as follows. The first method used in field studies is to measure contaminant concentrations.
Year: 2017
Publisher : International Conference on Engineering and Information Technology
By : Gamer Javadi Sharif, Faramarz Dolati Ardeh Jani, Ali Rajai
File Information: Persian Language/ 9 Page / size: 902 KB
سال : 1396
ناشر : کنفرانس بین المللی مهندسی و فن آوری اطلاعات
کاری از : پرنیان جوادی شریف , فرامرز دولتی ارده جانی, علی رجایی
اطلاعات فایل : زبان فارسی / 9 صفحه / حجم : KB 902
نقد و بررسیها
هنوز بررسیای ثبت نشده است.