توضیحات
چکیده
راديان تيوبهاي کوره آنيل پيوسته شركت فولاد مبارکه از جنس سوپرآلياژ Inconel 601زودتر از طول عمر طراحي شده، تخريب شده اند. مطالعات قبلي نشان ميدهدکه علت تخريب آنها ترکيبي از خزش واکسيداسيون دماي بالا است. در اين شرايط چگونگي گسترش ترک هاي خزشي اهميت پيدا ميكند.بنابراين در اين مطالعه پس از بررسي هاي اوليه، ترکهايي در نمونه تهيه شده از ناحيه مجاور به منطقه تخريب، توسط دستگاه اريكسون ايجاد شد و نحوه پيشرفت ترکها با استفاده از ميکروسکوپ نوري و الکتروني مورد مطالعه قرار گرفت. همچنين سطح شکست بدست آمده از آزمون كشش نمونه سالم نيز مطالعه شد. براي ارزيابي توزيع سختي، از آزمايش سختي سنجي استفاده گرديد. نتايج نشان ميدهد که ترکها در امتداد رسوبات مرزدانه اي گسترش يافته اند. با اين وجود سطح شکست نمونه سالم نشان دهنده شکست نرم ماده ميباشد. نتايج ريزسختي سنجي نيز اختلاف زياد بين زمينه و رسوبات را نشان ميدهد. اين حالت منجر به گسترش ترک در امتداد رسوبات سخت موجود در زمينه نرم ميگردد.
مقدمه
به منظورآنيل پيوسته ورقه اي فولادي در فرايند گالوانيزه، ورق معمولاً از ميان دو رديف از راديان تيوبها ميگذرد كه اين لوله ها در بالا و پايين مسير حركت قرارگرفته اند. ورق توسط تشعشع ايجاد شده از راديان تيوبهاي حاوي مشعل هاي دروني گرم ميشود. به دليل قرارگيري طولاني مدت در دماي بالا، لوله در معرض تخريب قرار ميگيرد و عوامل متعددي مانند اكسيداسيون دماي بالا، خزش و خستگي باعث تخريب لوله ها ميگردند. در نتيجه، معمولاً نازك شدن لوله و آغاز ترك خوردگي اتفاق ميافتد و منجر به خارج شدن گاز از ميان تركها و ايجاد مشكلات سطحي جدي برروي محصول ورق نورد شده ميگردد. از آنجا كه دماي كاري راديان تيوبهاي خط آنيل پيوسته فولاد، معمولا در حدود ۹۵۰°Cميباشد، اين لوله ها از ورقهاي سوپر آلياژ هاي پايه نيكل كار شده و مقاوم در برابر حرارت ساخته ميشوند. سوپرآلياژهاي پايه نيکل از مواد مناسب جهت کار در دماي بالا هستند که عليرغم استحکام مناسب (در دماهاي بالا) داراي داکتيليته خزشي کمي ميباشند.
ABSTRACT
The radial pipes of the annealed furnace tubes of the Mobarakeh Steel Company have been destroyed by the Inconel 601 superalloy sooner than their lifetime. Previous studies have shown that the cause of their destruction is a combination of high cure and high temperature evaporation. In this situation, the importance of the development of creep cracks is important. Therefore, in this study, after the initial investigations, cracks in the specimen from the adjacent region to the destruction area were created by the Erikson apparatus and the development of the cracks by light and electron microscopy Was studied. Also, the level of failure obtained from a healthy sample tensile test was also studied. A hardness test was used to evaluate the hardness distribution. The results show that the Turks expanded along the boundary sediments. However, the healthy sample failure rate indicates a soft defect in the material. Microhardness results also show a large difference between background and sediment. This situation leads to the expansion of cracks along the soft sediments.
INTRODUCTION
In order to continuously process a sheet of steel in the galvanizing process, the sheet usually passes through two rows of tubular tubes that are located up and down the path of movement. The sheet is heated by radiations made of tubular radiators containing internal burners. Due to long term exposure at high temperatures, the tube is exposed to degradation and several factors, such as high temperature oxidation, creep and fatigue, damage the tubes. As a result, usually the thinning of the tube and the beginning of cracking occur, leading to the exhaust of gas from the cracks and causing serious surface problems on the product of the rolled sheet. Since the working temperature of the continuous steel wire rod tubes is usually around 950 ° C, these pipes are made of nickel base alloy superalloy sheets and heat-resistant ones. Nickel base superalloys are high-temperature materials that, despite their good strength (at high temperatures), have a slight creep ductility.
Year: 2007
Publisher : 11th National Congress of metallurgy of Iran
By : Mostafa Lotfiani, Ghasem Deeni, Seyyed Mahmoud Moniroughifi, Seyed Morteza Navabi, Mohammad Safaeirad
File Information: persian Language/ 10 Page / size: 679 KB
سال : 1386
ناشر : يازدهمين كنگره ملي مهندسين متالورژی ايران
کاری از : مصطفي لطفياني ،قاسم ديني ،سيد محمود منيرواقفي ،سيد مرتضي نوابي ،محمد صفايي راد
اطلاعات فایل : زبان فارسی / 10 صفحه / حجم : KB 679
نقد و بررسیها
هنوز بررسیای ثبت نشده است.