توضیحات
چکیده
در نيروگاه هاي سيكل تركيبي به منظور خنك سازي بخش هاي گوناگون از برجهاي خنك كننده استفاده مي گردد. به علت در تماس بودن اين برج ها با آب، قطعات و قسمت هاي فلزي مي توانند در معرض خوردگي قرار گرفته و باعث خرابي و يا كاهش بازدهي نيروگاه گردد. نيروگاه سيكل تركيبي شريعتي، يكي از جديدترين نيروگاه هاي احداث شده در حومه مشهد مي باشد. در يك مطالعه موردي يكساله، اندازه گيري هاي مداوم و نمونه گيري هاي آنلاين در بخش Samplingجهت بررسي مقادير پارامترهاي موثر بر خوردگي انجام گرفت و در آخر راهكارهاي مناسب براي جلوگيري از خوردگي ارائه گرديد.
مقدمه
توربين ها اصولا بر اساس عامل ايجاد كننده انرژي تقسيم بندي مي گردند. اگر عامل ايجاد كننده گاز باشد آن را گازي، اگر آب باشد آبي و چنانچه باد باشد توربين بادي گويند. هر توربين گاز متشكل از دو محفظه احتراق است كه در طر فين توربين نصب هستند و سوخت گاز يا گازو ئيل پس از ورود به آن همراه با عملكرد سيستم جرقه مشتعل مي شود و با هوايي كه از سمت فيلترهاي ورودي وارد كمپرسور شده و پس از انبساط از آن خارج مي شود، وارد ناحيه محفظه احتراق گرديده و محترق مي گردد كه نتيجه آن توليد گازي با درجه حرارت بالا مي باشد. گاز مذكور وارد توربين گاز شده و سبب گردش توربين و در نتيجه محور ژنراتور گرديده و توليد برق مي كند. برج خنك كننده: برج خنك كننده دستگاهي است كه با ايجاد سطح وسيع تماس آب با هوا، عمل تبخير را آسان مي كند و باعث خنك شدن سريع آب مي گردد. عمل خنك شدن در اثر از دست دادن گرماي نهان تبخير انجام مي گيرد، مقدار كمي آب تبخير مي شود و باعث خنك شدن آب مي گردد. بيشتر دستگاه هاي خنك كن از يك مدار بسته تشكيل شده اند كه آب در اين دستگاه ها نقش جذب، دفع و انتقال گرما را به عهده دارد، يعني گرماي به وجود آمده توسط ماشين را جذب و از دستگاه دور مي سازد. اين كار باعث ادامه كار يكنواخت و پايداري دستگاه ميشود.
ABSTRACT
In combined cycle power plants, cooling towers are used to cool various parts. Due to the fact that these towers are in contact with water, parts and metal parts can be exposed to corrosion and cause damage or decrease in the efficiency of the power plant. Shariati combined cycle power plant is one of the newest power plants built in the suburbs of Mashhad. In a one-year case study, continuous measurements and online sampling in the Sampling section were carried out to study the amount of corrosion-effective parameters, and finally, suitable strategies for corrosion prevention were presented.
INTRODUCTION
Turbines are primarily based on the energy generator. If it’s a gas generator, it’s gasic, if the water is blue, and if it’s windy, it’s a wind turbine. Each gas turbine consists of two combustion chambers that are installed in the turbine and the fuel gas or gas after ignition is ignited with the function of the ignition system and is flushed with air from the side of the input filters into the compressor and after expansion It is released into the combustion chamber and the result is high temperature gas production. The gas enters the gas turbine and causes the turbine to circulate, resulting in the generator axis and generates electricity. Cooling tower: Cooling tower is a device that facilitates the evaporation of water by creating a wide surface of water contact with the water, causing rapid cooling of the water. The cooling operation is carried out by the loss of evapotranspiration, a small amount of water evaporates and causes the water to cool down. Most cooling devices are made up of a closed circuit, the water in which these devices play the role of absorption, excretion and heat transfer, that is, the heat generated by the machine is absorbed and discharged from the device. This will keep the machine running smoothly and consistently.
Year: 2011
Publisher : Sixth National Congress on Civil Engineering
By : Mohammad Shokouhin, Farzad Payandeh
File Information: persian Language/ 8 Page / size: 412 KB
Only site members can download free of charge after registering and adding to the cart
سال : 1390
ناشر : ششمین کنـگره ملی مهنـدسی عمـران
کاری از : محمد شكوهيان ،فرزاد پياده
اطلاعات فایل : زبان فارسی / 8 صفحه / حجم : KB 412
نقد و بررسیها
هنوز بررسیای ثبت نشده است.