توضیحات
چکیده
مقاومت برشي زهكشي نشده ، يكي از اصلي ترين مولفه ها براي بيان مشخصه هاي مقاومتي خاك هاي ريزدانه (رس و لاي) مي باشد كه تعيين آن در آزمايشگاه با انجام آزمايش هائي مانند سه محوري،تك محوري و برش مستقيم صورت مي پذيرد كه اين امر مستلزم صرف زمان و هزينه قابل توجه بوده واخذ نمونه هاي دست نخورده و حفظ شرايط نمونه( مشابه با شرايط صحرائي) ازمشكلات اين امر ميباشد ، لذا امروزه رويكرد به آزمايش هاي درجا و صحرائي در حال افزايش مي باشد . دراين تحقيق كه براساس نتايج مطالعات ژئوتكنيك انجام شده در بيش از پنجاه پروژه عملي در نقاط مختلف كشور (كه مگي به بهره برداري رسيده اند) ، تدوين گشته است (بخش ژئوتكنيك شركت مهندسان مشاور سانو) و در آنها از نتايج آزمايش هاي برش مستقيم درجا وآزمايشگاهي، سه محوري ،(UU) تك محوري و همچنين نتايج آزمون نفوذ استاندارد(SPT) استفاده شده است، رابطه تجربي مناسبي براي برآورد مقاومت برشي زهكشي نشده (CU) خاك هاي ريزدانه (رس و لاي) بر اساس نتايج آزمايش نفوذ استاندارد (NSPT) ارائه مي گردد كه مي تواند در طراحي هاي ژئوتكنيكي مورد استفاده قرار گيرد.
مقدمه
درتحليل و طراحي هاي ژئوتكنيكي مانند تعيين ظرفيت باربري شالوده هاي سطحي و عميق، بررسي پايداري شيرواني ها، تحليل سازه هاي زيرزميني، طراحي ديوار هاي حائل و ساير سازه هاي خاكي ، نياز به اطلاع از مولفه هاي مكانيكي خاك مي باشد. مقاومت برشي زهكشي نشده خاك با انجام آزمايش هائي نظير سه محوري ، تك محوري و يا برش مستقيم بر روي نمونه هاي دست نخورده خاك در آزمايشگاه و يا انجام آزمايش برش مستقيم درجا ، برش صفحه ، نفوذسنجي و غيره بصورت مستقيم بدست مي آيد. ازمشكلات نمونه برداري دست نخورده در خاك هاي ريز دانه ، حفظ شرايط نمونه، مشابه با شرايط صحرائي علاوه برصرف زمان و هزينه قابل توجه ميباشد . لذا تلاش محققان بر آن بوده است كه مقاومت برشي زهكشي نشده خاك ، بصورت غير مستقيم تعيين شود و بدين منظور از همبستگي حاصل از نتايج آزمايش نفوذ استاندارد ،(NSPT) آزمايش فشارسنجي ، نفوذ مخروط و غيره با مقاومت برشي زهكشي نشده (CU) استفاده مي شود.
ABSTRACT
Drainage shear strength is one of the main components for describing the resistance properties of fine grained soils (clay and lime), which is determined in a laboratory by performing tests such as three axes, single axis and direct cutting, which requires this. Spending time and cost is significant. The preservation of intact samples and maintaining sample conditions (similar to field conditions) are a matter of this, so today, the approach to on-site experiments is increasing. In this research, based on the results of geotechnical studies, more than fifty practical projects in different parts of the country (which have been exploited) have been compiled (Geotechnical section of Sano Consulting Engineers Company), and they are derived from the results of in situ shear tests. And single-axis UU, and also the results of the standard penetration test (SPT) have been used. An empirical correlation between finely divided (CU) and non-drained shear strength (CU) estimation based on the results of the standard penetration test NSPT) that can be used in geotechnical designs.
INTRODUCTION
In geotechnical analysis and design, such as determining the bearing capacity of surface and deep substructures, studying the stability of slopes, analyzing underground structures, designing retaining walls and other structures, it is necessary to know the mechanical components of the soil. The non-drainage shear strength is obtained directly by trials such as three axes, single axes, or direct cutting on intact soil samples in the laboratory or by performing straight-line in situ testing, cutting, plate penetration, etc. From intact sampling problems in fine grains, preserving sample conditions is similar to field conditions, in addition to considerable time and cost. Therefore, the researchers have tried to determine the non-drainage shear strength of the soil indirectly. For this purpose, the correlation obtained from the results of the standard penetration test (NSPT) of the barometric test, penetration of the cone, etc. with unplanned shear strength (CU) it is possible.
Year: 2011
Publisher : Sixth National Congress on Civil Engineering
By : Seyed Issa Fazeli Masoleh
File Information: persian Language/ 6 Page / size: 259 KB
Only site members can download free of charge after registering and adding to the cart
سال : 1390
ناشر : ششمین کنـگره ملی مهنـدسی عمـران
کاری از : سيد عيسي فاضلي ماسوله
اطلاعات فایل : زبان فارسی / 6 صفحه / حجم : KB 259
نقد و بررسیها
هنوز بررسیای ثبت نشده است.