توضیحات
چکیده
مشخص كردن سطح عملكرد، يك نياز براي مقاومسازي ساختمانهاي موجود و طراحي ساختمانهاي جديد مقاوم در برابر زلزله است. امروزه ابزار رايج در دست مهندسين براي تعيين سطح عملكرد، آناليز پوش آور است. اين آناليز بطور معمول با نرم افزارهاي تجاري، با صرف هزينه و زمان قابل ملاحظه انجام ميشود و نياز به يك روش دستي ساده و آيين نامه اي و با دقت قابل قبول براي ارزيابي سطح عملكرد سازه وجود دارد تا اگر خطاي اثر گذاري در اين نرم افزارهاي سربسته وجود دارد نمايان شود. در آيين نامه نيوزلند، روشي آمده است كه، به طور دستي، مكانيزم محتمل خرابي، مقاومت جانبي و تغييرمكان ظرفيت سازه را محاسبه ميكند. در اين مقاله، روش دستي ساده ،(SLaMA) به صورت مرحله به مرحله، معرفي شده است. نمونه مطالعاتي در تحقيق حاضر، يك ساختمان 5طبقه بتن مسلح با قاب خمشي ويژه است. سپس اين سازه با نرمافزار OpenSees(2007)تحت آناليز استاتيكي غيرخطي (پوش آور) و ديناميكي غيرخطي قرار گرفته است. از مدل پلاستيك متمركز (Lumped ،Plasticity Model) و مصالح Cloughدر نرم افزار OpenSees استفاده شده است. در نهايت، نتايج آناليز دستي، پوش آور و تاريخچه زماني غيرخطي با يكديگر مقايسه شده است.
مقدمه
SLaMAمخفف عبارت Simple Lateral Mechanism Analysisميباشد. در آيين نامه بهسازي نيوزلند (NZSEE) دو روش براي انجام آناليز استاتيكي غيرخطي ذكر شده است: آناليز پوش آور دقيق (Lateral Pushover Analysis)كه بوسيله نرم افزار انجام ميگيرد و آناليز دستي .SLaMAدر آناليز ،SLaMAبه طور دستي مكانيزم محتمل خرابي، مقاومت جانبي و تغييرمكان ظرفيت سازه محاسبه ميشود.
ABSTRACT
Determining the level of performance is a need to rehabilitate existing buildings and design new earthquake resistant buildings. Nowadays, the current tool used by engineers to determine the level of performance is flutter analysis. This analysis is usually done with commercial software at a considerable cost and time, and there is a need for a simple, straightforward manual and with an acceptable accuracy to evaluate the level of the performance of the structure, so that if the error of the software is affected There is a hermit there. In New Zealand, a method has been developed that manually calculates the probable mechanism of failure, lateral resistance and displacement of the structural capacity. In this paper, a simple manual method (SLaMA) is presented step-by-step. A sample of studies in this study is a 5-story concrete structure with a special bending frame. This structure is then subjected to nonlinear static and nonlinear static analysis using OpenSees software (2007). The Lumped, Plasticity Model and Clough materials are used in OpenSees software. Finally, the results of manual analysis, overlay and nonlinear time histories are compared with each other.
INTRODUCTION
SLaMA stands for Simple Lateral Mechanism Analysis. The NZSEE has two methods for performing nonlinear static analysis: Lateral Pushover Analysis, performed by the software, and manual analysis. SLAMA in the analysis, SLaMA, by hand, the probable failure mechanism, lateral resistance And the displacement of the structural capacity is calculated.
Year: 2011
Publisher : Sixth National Congress on Civil Engineering
By : Mohsen Tehrani Zadeh, Seyed Mahdi Moghadasi, Amir Musharraf
File Information: persian Language/ 6 Page / size: 407 KB
Only site members can download free of charge after registering and adding to the cart
سال : 1390
ناشر : ششمین کنـگره ملی مهنـدسی عمـران
کاری از : محسن تهراني زاده ،سيد مهدي مقدسي ،امير مشرف
اطلاعات فایل : زبان فارسی / 6 صفحه / حجم : KB 407
نقد و بررسیها
هنوز بررسیای ثبت نشده است.