توضیحات
چکیده
مبدل های آنالوگ به دیجیتال به طور گسترده ای در اندازه گیری، ارتباطات راه دور و پردازشگرهای سیگنال دیجیتال استفاده می شود. تبدیل سیگنال آنالوگ به دیجیتال در این مبدلها با اضافه شدن نویز کوانتیزاسیون همراه است. اثر نویز کوانتیزاسیون با بالا بردن نرخ نمونه برداری کاهش مییابد. برای کاهش بیشتر این نویز مدل ها و روش های مختلفی از جمله شکل دهی نویز با استفاده از مدولاتور سیگما دلتا ارایه شده است که عموما برای سیگنال های پایینگذر و با فرکانس پایین معتبر است. در این مقاله روشهای متداول سیگما دلتا مورد بررسی و شبیه سازی قرار گرفته است. در ادامه به دلیل بالا رفتن فرکانس کاری، طیف جدیدی از مشکلات از جمله عدم توانایی نمونه برداری با نرخ بالا به وجود خواهد آمد که نیاز است روش های قبلی مورد بازنگری قرار بگیرد که در شبیه سازی ها این فرض گنجانده شده است. روش های پیشنهاد شده باعث بهبود کیفیت و شباهت بیشتر سیگنال دیجیتال به آنالوگ میشود.
مقدمه
اطلاعات موجود در جهان پیرامون ما را سیگنال های آنالوگ تشکیل میدهند، اما ما برای پردازش آن ها از سیستم های دیجیتال استفاده میکنیم. مبدل ها ابزاری هستند که برای تبادل داده ها بین جهان آنالوگ و پردازنده های دیجیتال استفاده میشنود. سرعت پردازش در حوزه دیجیتال بسیار بالاتر از حوزه ی آنالوگ میباشد. بنابراین حالت دلخواه ما این است که سیگنالهای آنالوگ طبیعت را به سیگنال های دیجیتال تبدیل کرده و سپس کارهای پردازشی را روی آن انجام دهیم. برخی از برتری های سیستمها و سیگنال های دیجیتال نسبت به سیستمها و سیگنالهای آنالوگ عبارتند از: 1-ارزان ریاث تر و کوچتر بودن سامانه های دیجیتال نسبت به آنالوگ 2-مصرف برق کمتر 3-مقاوم تر بودن نسبت به نویز 4-امکان رمز کردن داده های دیجیتال.
ABSTRACT
Analog-to-digital converters are widely used in measurement, telecommunications, and digital signal processors. The conversion of analogue to digital signals into these converters is accompanied by the addition of quantization noise. The effect of quantization noise is reduced by increasing the sampling rate. To further reduce this noise, various models and techniques, including noise shaping, are provided using the Sigma Delta modulator, which is generally valid for low-pass and low-frequency signals. In this paper, Sigma Delta’s common approaches are being studied and simulated. In the future, due to the rise in the working frequency, a new range of problems will arise, including the inability of high-rate sampling, which needs to be reconsidered in previous modalities, which are included in the simulations. The proposed methods improve the quality and similarity of the digital signal to the analogue.
INTRODUCTION
The information in the world around us is made up of analog signals, but we use digital systems to process them. Converters are tools used to exchange data between the analog world and digital processors. The processing speed in the digital domain is much higher than the analog domain. So our preferred mode is to turn analog signals into digital signals into nature, and then do processing on it. Some of the advantages of digital systems and signals are analogous to analog systems and signals: 1. Cheaper gadgets and smaller digital systems than analogue. 2. Less power consumption. 3. Noise-resistant. -Ability to encode. Digital data.
Year: 2017
Publisher : Third Annual National Conference on Electrical Engineering, Computer and Biotechnology in Iran
By : Ali, Dr. Yaser Norouzi
File Information: Persian Language/ 9 Page / size: 767 KB
Only site members can download free of charge after registering and adding to the cart
سال : 1395
ناشر : سومین کنفرانس سالانه ملی مهندسی برق، کامپیوتر و بیو الکتریک ایران
کاری از : علي نفر ,دکتر یاسر نوروزی
اطلاعات فایل : زبان فارسی / 9 صفحه / حجم : KB 767
نقد و بررسیها
هنوز بررسیای ثبت نشده است.