توضیحات
خلاصه
طراحي بر اساس عملكرد موضوعي است كه در سال هاي اخير مورد توجه قرار گرفته و تلاشهاي زيادي در خصوص روشهاي طراحي و ارزيابي ساختمانها در برابر سطوح مختلف زلزله با استفاده از تحليل هاي غيرخطي صورت پذيرفته است. يكي از جديدترين ابزار طراحي براساس عملكرد روش طراحي مبتني بر جابه جايي است. در اين مطالعه يك روش جديد و ساده طراحي براساس جابه جايي به عنوان يكي از روش هاي جايگزين روش نيرويي در طراحي ساختمانها معرفي شده است. تعدادي ساختمان بتن مسلح با سيستم قاب خمشي و با كاربري ضروري (اهميت خيلي زياد) به روش جديد طراحي بر اساس كنترل جابه جايي و روش استاتيكي معادل آيين نامه زلزله ايران طراحي شده و عملكرد آنها با استفاده از آناليز استاتيكي غيرخطي (پوش اور) مورد ارزيابي قرار گرفته است. دليل انتخاب ساختمانهاي با اهميت خيلي زياد در اين مقاله، تأكيد آيين نامه زلزله ايران (استاندارد2800 -84 )بر قابل استفاده بودن و عدم آسيب عمده سازهاي پس از وقوع زلزله هاي شديد در اين نوع ساختمانها است. از طرفي در آييننامه با الزام استفاده از سيستم هاي با عنوان ويژه در مناطق با خطر نسبي زياد و خيلي زياد، بزرگترين ضرايب رفتار (R) براي اين سيستم ها در نظر گرفته شده است، در نتيجه اين سازه ها براي نيروي كوچكي طراحي شده و در هنگام وقوع زلزله به علت سختي كم، تغيير مكان هاي بزرگي تجربه كرده و كاربري خود را از دست ميدهند. هدف از اين مقاله، ارائه روش طراحي قابل اطمينان براي اين نوع از سازه ها است به گونه اي كه در طراحي با توجه به عملكرد مورد انتظار، به جاي ضريب رفتار از ظرفيت شكل پذيري سازه استفاده شود. نتايج نشان ميدهد سازه هاي طراحي شده با استاندارد 2800ايران جوابگوي سطح عملكرد مورد نظر نبوده و ميزان تغييرمكان هاي نسبي طبقات از مقادير مجاز فراتر رفته است حال آنكه در ساختمان هاي طراحي شده به روش كنترل جابه جايي اهداف عملكردي مورد نظر تأمين شده است، از اين رو شايسته است براي طراحي اينگونه ساختمانها از روشهاي عملكردي و مبتني بر جابه جايي استفاده شود.
مقدمه
آيين نامه هاي بارگذاري و طرح لرزه اي كنوني كه براساس نيرو تهيه شده اند براي طراحي در محدوده ارتجاعي مناسب هستند، اما سطوحي از عملكرد كه متضمن پذيرش خسارت است بر اساس معيار جابه جايي قابل تعريف است. از اين رو روش هاي طراحي مبتني بر جابه جايي به عنوان جديدترين ابزار طراحي بر اساس عملكرد ارائه شده اند.
ABSTRACT
The design is based on the thematic function that has been considered in recent years and many efforts have been made regarding design and evaluation methods of buildings against different levels of earthquake using nonlinear analyzes. One of the newest design tools based on the operation of the design based on displacement. In this study, a new and simplified design based on displacement is introduced as one of the alternatives to the method of power design in buildings. A number of reinforced concrete buildings with a flexible frame system and with essential use (very high importance) were designed by a new method based on displacement control and static method equivalent to the Iranian earthquake rules and their performance was determined using static nonlinear analysis Has been evaluated. The reason for choosing very important buildings in this article is the emphasis of the Iranian earthquake rule (2800 -84) on the possibility of major damage to machinery after severe earthquakes in this type of building. On the other hand, in the regulations, the requirement for the use of special systems in areas with a high and very high risk is considered to be the largest behavior coefficient (R) for these systems. As a result, these structures are designed for small power and In the event of an earthquake, due to its low stiffness, there is a change in the great places and they lose their usefulness. The purpose of this paper is to provide a reliable design method for this type of structure so that in designing according to the expected performance, the structural strength of the structure is used instead of the behavior coefficient. The results show that the structures constructed with Iran’s 2800 standard do not meet the desired performance level and the relative changes of the floors have exceeded the permitted values, while in the designed buildings, the control of the displacement of the desired performance targets has been provided. It is desirable to use functional and shift-based methods for designing such buildings.
INTRODUCTION
Loaded regulations and current seismic plans are suitable for design in the reactionary range, but levels of performance that involves accepting damages can be defined according to the displacement criterion. Hence, displacement-based design methods are presented as the latest design tools based on performance.
Year: 2011
Publisher : Sixth National Congress on Civil Engineering
By : Narges Esmashi , Ali Masoumi
File Information: English Language/ 8 Page / size: 428 KB
Only site members can download free of charge after registering and adding to the cart
سال : 1390
ناشر : ششمین کنـگره ملی مهنـدسی عمـران
کاری از : نرگس ايماشي ، علي معصومي
اطلاعات فایل : زبان فارسی / 8 صفحه / حجم : KB 428
نقد و بررسیها
هنوز بررسیای ثبت نشده است.